refactor: namespace restructure of entire codebase
continuous-integration/drone/push Build is passing

Reorganize all source files into a hierarchical namespace structure
with dot-separated unit names matching directory paths.

Major changes:
- src/prog/ -> src/app/ (app.*.pas)
- src/fault/ -> src/arch/x86/fault/ (arch.x86.fault.*.pas)
- src/isr/ -> src/arch/x86/isr/ (arch.x86.isr.*.pas)
- src/include/ -> src/core/ (core.*.pas) + src/arch/x86/
- src/driver/ subtree reorganized with driver.* namespace prefixes
- src/driver/storage/con/ -> src/driver/storage/ctl/ (Windows reserved name fix)
- src/driver/storage/ split into con(ctl)/fs/vol/ subdirectories
- src/driver/net/ flattened from l1-l5 layers to driver.net.*.pas
- kernel.pas -> asuro.pas, faults.pas -> arch.x86.faults.pas
- stdio.pas/syslog.pas -> io/io.stdio.pas, io/io.syslog.pas
- processmanager.pas -> proc/proc.mgr.pas
- lmemorymanager.pas -> memory/memory.heap.pas
- Build scripts moved to toolchain/
- Added compat/ shims for lmemorymanager and types
- Added doc/namespace.md tracking the refactor

197 files changed, 6292 insertions(+), 5526 deletions(-)
This commit is contained in:
t3hn3rd committed 2026-03-08 01:28:31 +00:00
1 parent e922f086c2
commit 6fa008ed79
197 files changed
+6291 -5525

No files matched your search

File diff suppressed because it is too large. Load diff
@@ -0,0 +1,113 @@
// Copyright 2021 Aaron Hance
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
{
Driver->Storage->mbr Master boot record
@author(Aaron Hance [email protected])
}
unit driver.storage.vol.mbr;
interface
uses
debug.tracer;
type
PMaster_Boot_Record = ^TMaster_Boot_Record;
PPartition_table = ^TPartition_table;
TPartition_table = bitpacked record
attributes : uint8;
CHS_start : array[0..2] of uint8;
system_id : uint8;
CHS_end : array[0..2] of uint8;
LBA_start : uInt32;
sector_count : uInt32;
end;
TMaster_Boot_Record = bitpacked record
bootstrap : array[0..439] of uint8;
signature : uint32;
rsv : uint16;
partition : array[0..3] of TPartition_table;
boot_sector : uint16;
end;
T24bit = array[0..2] of uint8;
function get_bootable(partition_table : PPartition_table) : boolean;
procedure set_bootable(partition_table : PPartition_table);
procedure setup_partition(partition_table : PPartition_table; address : uint32; sectorSize : uint32);
implementation
{ convert LBA address to CHS address}
function LBA_2_CHS(lba : uint32) : T24bit;
var
dat : T24bit;
cylinder, head, sector : uint16;
sectors_per_track : uint16;
heads_per_cylinder : uint16;
begin
// Standard CHS geometry values
sectors_per_track := 63;
heads_per_cylinder := 255;
// Calculate CHS values from LBA
sector := (lba mod sectors_per_track) + 1; // Sectors are 1-indexed
head := (lba div sectors_per_track) mod heads_per_cylinder;
cylinder := (lba div sectors_per_track) div heads_per_cylinder;
// Pack into mbr CHS format (3 bytes):
// Byte 0: Head (8 bits)
// Byte 1: Sector (bits 0-5) | Cylinder high 2 bits (bits 6-7)
// Byte 2: Cylinder low 8 bits
dat[0] := head;
dat[1] := (sector and $3F) or ((cylinder shr 8) shl 6);
dat[2] := (cylinder and $FF);
LBA_2_CHS := dat;
end;
{ Set a partition struct to be bootable}
procedure set_bootable(partition_table : PPartition_table);
begin
push_trace('driver.storage.vol.mbr.set_bootable');
//set the bootble bit in attributes
partition_table^.attributes := (partition_table^.attributes and $80);
end;
{ Check a partitions bootable bit }
function get_bootable(partition_table : PPartition_table) : boolean;
begin
push_trace('driver.storage.vol.mbr.get_bootable');
//get the bootble bit in attributes
get_bootable := (partition_table^.attributes and $80) = $80;
end;
{ Setup a partition table struct }
procedure setup_partition(partition_table : PPartition_table; address : uint32; sectorSize : uint32);
begin
push_trace('driver.storage.vol.mbr.setup_partition');
//set values in both LBA and CHS addressing schemes
partition_table^.LBA_start := address;
partition_table^.sector_count := sectorSize;
partition_table^.CHS_start := LBA_2_CHS(address);
partition_table^.CHS_start := LBA_2_CHS(address + sectorSize);
push_trace('driver.storage.vol.mbr.setup_partition.end');
end;
end.
File diff suppressed because it is too large. Load diff
@@ -0,0 +1,61 @@
// Copyright 2021 Aaron Hance
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
{
Driver->Storage->PartitionTable - mbr partition table parsing and management.
@author(Aaron Hance <[email protected]>)
}
unit driver.storage.vol.table;
interface
uses
io.syslog,
core.ds.lists,
memory.heap,
driver.timer.rtc,
storagemanagement,
core.strings,
io.stdio,
debug.tracer,
core.util, arch.x86.util;
type
TpartitionTable = record
end;
PpartitionTable = ^TpartitionTable;
var
location = $1BE;
procedure create_new(device : PStorage_Device);
function get_table() : PpartitionTable;
procedure add_volume(volume : TStorage_Volume);
implementation
procedure create_new(device : PStorage_Device);
var
begin
end;
function get_table() : PpartitionTable;
procedure add_volume(volume : TStorage_Volume);
end.