feat: auto-mount boot drive to /boot; fix FAT32 deleted entry triple fault

- Decode multiboot boot_device byte in storagemanager to identify boot device
- Add isBootDevice to TStorage_Device; propagate isBootDrive to volumes
- Create /boot VFS directory at init; mount boot volume there in auto_mount_volumes
- Fix getDirEntries skipping \-marked (deleted) FAT32 entries to prevent
  triple fault when navigating into a deleted directory via file picker

compile_sources.sh

@@ -4,4 +4,10 @@ echo "======================="
 echo " "
 echo "Compiling FPC Sources..."
 echo " "
-fpc -Aelf -gw -g -gl -n -v0ew -O3 -OpPENTIUM3 -Si -Sc -Sg -Xd -CX -XXs -CfSSE -CfSSE2 -Rintel -Pi386 -Tlinux -FElib/ -Fusrc/* -Fusrc/include/* -Fusrc/driver/* -Fusrc/driver/net/* -Fusrc/driver/bus/* -Fusrc/driver/bus/usb/* -Fusrc/driver/hid/* src/kernel.pas
+# Build -Fu flags for all directories under src/ and wasuro/
+FU_PATHS="-Fusrc -Fuwasuro"
+for dir in $(find src wasuro -type d 2>/dev/null); do
+    FU_PATHS="$FU_PATHS -Fu$dir"
+done
+
+fpc -Aelf -gw -g -gl -n -v0ew -O3 -OpPENTIUM3 -Si -Sc -Sg -Xd -CX -XXs -CfSSE -CfSSE2 -Rintel -Pi386 -Tlinux -FElib/ $FU_PATHS src/kernel.pas

doc/flatfs.md

@@ -0,0 +1,32 @@
+#Flat filesystem
+
+A super simple filesystem for asuro. Folders are emulated in filenames.
+
+Starts with disk info sector, sector 0 of volume
+
+---
+#### disk info
+
+jmp2boot        : ubit24;
+OEMName         : array[0..7] of char;
+version         : uint16 // numerical version of filesystem
+sectorCount      : uint16;
+fileCount       : uint16
+signature       : uint32 = 0x0B00B1E5
+
+
+the Rest of the sector is reserved
+
+---
+
+Starting from sector 1 is the file table. Table size is determined by entry size (64) * fileCount
+
+---
+####File entry
+
+name : array[0..59] of char //file name max 60 chars
+fileStart : 16bit // start sector of data
+fileSize : 16bit // data size in sectors
+
+---
+

iso/hello.txt

@@ -0,0 +1 @@
+Hello from the Asuro ISO!

lessons_learnt.md

@@ -0,0 +1,40 @@
+# Lessons Learnt
+
+## 1. File Pickers Must Be Proper Reusable OS Components
+Inline pickers hacked into app code are broken and not reusable. Build file pickers as a standalone unit (`filepicker.pas`) that any program can call via a callback.
+
+## 2. All Errors Need Visible In-App Feedback
+Never use `syslog.logln` as the only error output. Always show the user a dialog, msgbox, or status bar message. Syslog is supplemental only.
+
+## 4. Shell Command Output Goes to stdout_buf, Not syslog
+Use `stdio.bufWriteStr(stdout_buf, ...)` for all shell command output. `syslog` is for kernel diagnostics only.
+
+## 5. Unit Test Convention
+New subsystem units get a `procedure UnitTest` (called at boot from kernel.pas) and a `procedure init` that registers a CLI command so tests can be re-run at runtime. Tests use a nested `Assert(condition, name)` that increments `passed`/`failed` and logs failures via `syslog.logln`. At-boot tests must not do disk I/O — only test in-memory/virtual structures.
+
+## 6. ISR-Visible Spin-Wait Flags Must Use Pointer Dereferencing
+FPC has no `volatile` keyword. Any `while flag = 0 do asm hlt end` loop where `flag` is set by an ISR will hang forever because FPC hoists the load into a register before the loop and never re-reads memory. Always access the flag through a pointer: `while puint32(@flag)^ = 0 do proc_yield()`. This applies everywhere in the kernel that spins waiting for ISR-written state (e.g. `submit_io_wait`, `proc_await`-style loops, DMA done flags).
+
+## 7. Never Spawn a Process Per I/O Operation
+Spawning a new kernel process for each FAT32 read/write/dir operation is pure overhead: process creation (kalloc 8 KB stack, fake IRET frame, DList insertion), an extra context switch, and a double-wait (VFS spins on the worker, worker spins on AHCI). Instead, submit the I/O directly and park the calling process via `psAwaiting` until the AHCI ISR fires the completion callback — zero extra processes, zero wasted scheduler ticks.
+
+## 8. Use psAwaiting to Park a Process Pending Async I/O (not proc_yield spin)
+The correct way to block a process on an async I/O result is: (1) set up a completion callback that sets `State := psReady` then `Done := 1`, (2) atomically check if the operation is already done (under CLI) and set `CurrentProcess^.State := psAwaiting` if not, (3) spin on `Done` via `puint32(@wait.Done)^` per Lesson #6 with `asm hlt end` inside the loop. The process is removed from the runnable set while hardware works. **Do NOT call `proc_await` from `submit_io_wait`** — `proc_await` spins on `CurrentProcess^.State = psAwaiting` without pointer indirection and FPC caches the value in a register, causing it to return immediately before the I/O completes. The calling code then reads garbage from the DMA buffer, causing invalid pointer dereferences and page faults.
+
+## 9. VFS GetDirectoryListing Must Return a Snapshot, Not a Live Tree Reference
+`GetDirectoryListing` for `otVDIRECTORY` nodes previously returned `PHashMap(Obj^.Reference)` — a direct pointer into the live VFS tree. When callers called `FreeDirectoryListing` on the returned map, it freed the live VFSObjects and their name strings, destroying the VFS tree. Any subsequent `GetObjectFromPath` call would then dereference the trashed memory and page fault. **Fix**: always return a heap-allocated snapshot copy of the directory (new `PHashMap`, new `PVFSObject` entries with `stringCopy`'d keys). `FreeDirectoryListing` can then safely own and free the snapshot without touching the live tree. The rule: any function that returns a `PHashMap` to a caller who will call `FreeDirectoryListing` must allocate a fresh map — never return a raw interior pointer to a live data structure.
+
+## 10. Never Call Synchronous Disk I/O From an LVGL Timer or Event Callback
+LVGL timer callbacks (`lv_timer_create`) and event callbacks run synchronously inside the LVGL render loop. Calling any function that parks the current process waiting for disk I/O (e.g. `vfs.FileSize`, `vfs.OpenFile`, `vfs.ReadFile`) from inside a timer or event callback will hang the entire UI — the process blocks mid-callback and the LVGL loop never resumes. All disk I/O that must occur in a UI context must either: (a) use the async VFS API (`OpenFileAsync`, `WriteFileAsync`) with a completion callback that triggers a deferred LVGL update, or (b) be deferred to a dedicated worker process that signals back via a flag the UI can poll. `GetDirectoryListingFrom` is the one bulk exception — it was already present in the original picker and works because it loads into a snapshot synchronously as a single operation; per-file calls like `FileSize` in a loop are the problem.
+
+## 11. Never Allocate Large Arrays as Local Variables in Deep Kernel Call Chains
+Local variables are stack-allocated in Pascal. Kernel processes have a fixed, limited stack (≈8 KB). In deep LVGL callback chains (kernel → LVGL render loop → timer callback → app code), there may only be a few KB of usable stack remaining by the time app code executes. Declaring local arrays larger than ~200–400 bytes (e.g. `array[0..255] of pchar` = 1024 bytes) inside any procedure that runs in this context will silently overflow the stack, corruptung adjacent memory and causing a page fault with a garbled call trace. **Rule**: any local variable array larger than ~128 bytes in a UI callback or procedure called from one must be moved to the heap with `kalloc`/`kfree`. The corruption pattern is a page fault with a call stack full of completely unrelated function names.
+
+## 12. Pascal Silently Ignores Everything After `end.` — Dead Code Masquerades as Live Code
+FPC compiles everything up to and including the first `end.` and silently discards the rest of the file. If a file is partially rewritten by prepending a new implementation but the old implementation is not deleted, the old code survives after `end.`. Forward declarations resolve to the **last** implementation before `end.` — so if the new code was added before the old `end.` but the old procedures were in the "dead" zone they have no effect. However the reverse is dangerous: if the old `end.` was replaced/removed and the new code placed before it, the old procedures in the dead zone still compile to nothing but pollute the source. **Rule**: after any large-scale replacement of a Pascal unit, explicitly check where `end.` falls with a text search and PowerShell-truncate the file at the first `end.`. Never assume a multi-step replacement tool correctly removed all old code — always verify with `Select-String -Pattern "^end\.$"`.
+
+## 13. `for i := 0 to uint32_count - 1` Wraps to 4 Billion When Count is Zero
+In Free Pascal, `uint32` arithmetic wraps: if `dir_count` is `uint32` and equals `0`, then `dir_count - 1 = 0xFFFFFFFF`. A `for i := 0 to dir_count - 1 do` loop with zero count does NOT skip — it runs 4 billion iterations, immediately accessing invalid memory and page faulting. FPC does not emit a warning for this. **Rule**: always guard `uint32`-bounded for loops: `if count > 0 then for i := 0 to count - 1 do`. Alternatively, use `sint32` for loop counters that might legitimately be zero.
+
+## 14. FAT32 Deleted Entries ($E5) Must Be Filtered in getDirEntries
+When a FAT32 directory entry is deleted, `fileName[0]` is overwritten with `$E5` but the rest of the entry (including the cluster pointer) remains intact on disk. `getDirEntries` must explicitly skip entries where `fileName[0] = char($E5)` — stopping only at `char(0)` (end-of-directory) is not enough. If `$E5` entries are returned to callers, they appear in directory listings with a garbage first character, and navigating into them follows a stale/freed cluster chain, which causes reads into arbitrary memory or FAT data, leading to a triple fault. Fix location: the `while i < maxEntries` loop in `fat32.getDirEntries`.

src/contextswitcher.pas

@@ -29,14 +29,11 @@ unit contextswitcher;
 interface
 
 uses
-    idt, isrmanager, processmanager, proctypes, util, syslog, tracer;
+    idt, isrmanager, processmanager, proctypes, util, tracer;
 
 { Initialise: overwrite IDT gate 32 with our custom ISR. }
 procedure init;
 
-{ No idle ESP variable needed — idle is now a formal process (PID 0)
-  with its SavedESP managed like any other process. }
-
 implementation
 
 { -----------------------------------------------------------------------

src/driver/bus/PCI.pas

@@ -91,6 +91,7 @@ function getDeviceInfo(class_code : uint8; subclass_code : uint8; prog_if : uint
 procedure requestConfig(bus : uint8; slot : uint8; func : uint8; row : uint8);
 procedure writeConfig(bus: uint8; slot : uint8; func : uint8; row : uint8; val : uint32);
 procedure setBusMaster(bus : uint8; slot : uint8; func : uint8; master : boolean);
+procedure enableDevice(bus : uint8; slot : uint8; func : uint8);
 
 implementation 
 
@@ -442,4 +443,34 @@ begin
     pop_trace;
 end;
 
+//Enable device inturrupts and set bus master
+procedure enableDevice(bus : uint8; slot : uint8; func : uint8);
+var
+    addr : uint32;
+    cmd : uint32;
+begin
+    push_trace('PCI.enableDevice');
+
+    addr := ($1 shl 31);
+    addr := addr or (bus shl 16);
+    addr := addr or ((slot) shl 11);
+    addr := addr or ((func) shl 8);
+    addr := addr or ($04 and $FC);
+
+    outl(PCI_CONFIG_ADDRESS_PORT, addr);
+    cmd := inl(PCI_CONFIG_DATA_PORT);
+    cmd := cmd or PCI_COMMAND_MEM_SPACE;
+    cmd := cmd or PCI_COMMAND_BUS_MASTER;
+    cmd := cmd or (3 shl 1);
+
+    //enable interrupts, remove disable interrupt bit maybe
+    cmd := cmd and not PCI_COMMAND_INT_DISABLE;
+    // cmd := cmd and not (1 shl 9);
+
+    outl(PCI_CONFIG_ADDRESS_PORT, addr);
+    outl(PCI_CONFIG_DATA_PORT, cmd);
+
+    pop_trace;
+end;
+
 end.

src/driver/bus/usb/usbcore.pas

@@ -957,11 +957,14 @@ end;
 procedure usb_check_hotplug;
 var
     i    : uint32;
+    count: uint32;
     hc   : PUSBHCDriver;
     port : uint8;
 begin
     if HCList = nil then exit;
-    for i := 0 to LL_Size(HCList) - 1 do begin
+    count := LL_Size(HCList);
+    if count = 0 then exit;
+    for i := 0 to count - 1 do begin
         hc := PUSBHCDriver(LL_Get(HCList, i));
         if (hc <> nil) and hc^.PortChangePending then begin
             hc^.PortChangePending := false;

src/driver/hid/ps2/ps2_mouse.pas

@@ -119,8 +119,12 @@ var
     x32, y32 : sint32;
     r : pchar;
 begin
+    { mouse_wait(0) checks OBF with a short timeout (100 iterations).
+      When it returns true, data is ready — read it directly with inb($60).
+      Do NOT call mouse_read here: it uses mouse_wait_long (100k iterations)
+      and would spin-block the ISR if the next packet byte hasn't arrived yet. }
     while mouse_wait(0) do begin
-        b := mouse_read;
+        b := inb($60);
         if Cycle = 0 then begin
             if (b AND $08) = $08 then begin
                 Mouse_Byte[Cycle] := b;

src/driver/include/drivertypes.pas

@@ -21,6 +21,29 @@ unit drivertypes;
 
 interface
 
+const
+    PCI_CONFIG_ADDRESS_PORT = $0CF8;
+    PCI_CONFIG_DATA_PORT    = $0CFC;
+
+    PCI_COMMAND_IO_SPACE    = $0001;
+    PCI_COMMAND_MEM_SPACE   = $0002;
+    PCI_COMMAND_BUS_MASTER  = $0004;
+    PCI_COMMAND_SPECIAL_CYC = $0008;
+    PCI_COMMAND_MEM_WRITE   = $0010;
+    PCI_COMMAND_VGA_PALETTE = $0020;
+    PCI_COMMAND_PARITY      = $0040;
+    PCI_COMMAND_WAIT        = $0080;
+    PCI_COMMAND_SERR        = $0100;
+    PCI_COMMAND_FAST_BACK   = $0200;
+    PCI_COMMAND_INT_DISABLE = $0400;
+    PCI_COMMAND_SERR_ENABLE = $8000;
+
+    PCI_CAP_ID_MSI           = $05;
+
+    // Bits in the MSI Control register (16-bit):
+    MSI_CONTROL_ENABLE       = 1 shl 0;  // Bit 0
+    MSI_CONTROL_64BIT        = 1 shl 7;  // Bit 7
+    MSI_CONTROL_PVMASK       = 1 shl 8;  // Bit 8 (optional: per-vector masking)
 type
 
     PPCI_Device = ^TPCI_Device;
@@ -44,6 +67,7 @@ type
         address1       : uint32;
         address2       : uint32;
         address3       : uint32;
+
         address4       : uint32;
         address5       : uint32;
         CIS_pointer    : uint32;

src/driver/storage/AHCI/notes.md

@@ -0,0 +1,58 @@
+# AHCI Driver Notes
+
+## Pre-scheduling / Process Kill Hazards
+
+### 1. Dangling DMA Buffer (critical)
+When a process is killed, its `kalloc`'d buffers get freed. But the AHCI hardware
+is still DMA'ing into that physical memory. The DMA write lands on whatever now
+occupies that memory, silently corrupting the kernel heap or another process.
+
+**Fix:** Before freeing a process's memory, either:
+- Wait for all its pending AHCI slots to drain (`cmd_issue` bits clear), or
+- Issue a port reset to abort in-flight commands, *then* free memory.
+
+### 2. Dangling Completion Callback / Userdata Pointer (critical)
+In `storage_read`/`storage_write`, the completion callback writes to `@done` —
+a **stack-local variable**. If the scheduler preempts or kills the process while
+it's in the `hlt` loop, that stack frame is gone. The ISR fires and writes to a
+dangling stack address, corrupting whatever now uses that stack page.
+
+**Fix:** The `done` flag and completion context must be heap-allocated (or in a
+kernel-owned structure that outlives the process). A per-request struct like:
+```pascal
+type TPendingIO = record
+    done     : uint32;
+    ownerPID : uint32;  { skip delivery if process is dead }
+end;
+```
+
+### 3. Command Slot Leak
+If a process is killed with pending I/O, `pending[slot].inUse` stays `true`
+forever. Eventually all 32 slots fill up and the device becomes unusable.
+
+**Fix:** When killing a process, scan all AHCI devices for `pending[]` entries
+belonging to that process, and either:
+- Let the hardware finish but null out the completion callback (ISR just frees slot), or
+- Abort the command (port reset) and clear the slot.
+
+### 4. Interrupt-Disabled Preemption
+The `asm sti` before the `hlt` loop is fine, but if the timer fires during setup
+(between `readCallbackAsync(...)` and `asm sti`), the process could be switched
+out with interrupts in an unexpected state. `hlt` is also not preemption-safe.
+
+**Fix:** Move to a proper wait-queue/sleep mechanism instead of `hlt`.
+
+## Recommended Path Forward
+Implement a small **I/O request queue** owned by the kernel (not the process stack):
+1. Allocate a request struct
+2. Put it on a per-device queue
+3. ISR completes it
+4. Process kill walks the queue and cancels entries for that PID
+
+## Other Bugs Fixed (2026-03-03)
+- **vtop mask bug:** `$FFFFFF` (24-bit) → `$3FFFFF` (22-bit) for 4MB page offset
+- **find_cmd_slot:** Now checks `pending[].inUse` in addition to `cmd_issue` bit
+- **Missing lba5:** Both `send_read_dma_async` and `send_write_dma_async` now write all 48 LBA bits
+- **IOAPIC routing:** PCI interrupts routed through IOAPIC so AHCI interrupts actually reach the CPU
+- **LAPIC EOI:** `ISR_N` now sends LAPIC EOI for IOAPIC-delivered interrupts
+- **PxIS pre-clear removed:** No longer blanket-clears port interrupt status before issuing commands (was eating other slots' completions)

src/driver/storage/ATA_ISR.pas

@@ -1,85 +0,0 @@
-//  Copyright 2021 Aaron Hance
-//
-//  Licensed under the Apache License, Version 2.0 (the "License");
-//  you may not use this file except in compliance with the License.
-//  You may obtain a copy of the License at
-//
-//  http://www.apache.org/licenses/LICENSE-2.0
-//
-//  Unless required by applicable law or agreed to in writing, software
-//  distributed under the License is distributed on an "AS IS" BASIS,
-//  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-//  See the License for the specific language governing permissions and
-//  limitations under the License.
-
-{ 
-	Drivers->Storage->ATA_ISR - Primary ATA IRQ.
-	
-	@author(Aaron Hance <[email protected]>)
-}
-unit ATA_ISR;
-
-interface
-
-uses
-    util,
-    syslog,
-    isr_types,
-    isrmanager,
-    IDT;
-
-procedure register();
-procedure hook(hook_method : uint32);
-procedure unhook(hook_method : uint32);
-
-implementation
-
-var
-    Hooks : Array[1..MAX_HOOKS] of pp_hook_method;
-
-procedure Main(); interrupt;
-var
-    i : integer;
-    
-begin
-    CLI;
-    for i:=0 to MAX_HOOKS-1 do begin
-        if uint32(Hooks[i]) <> 0 then Hooks[i](void($00000000));
-    end;
-    syslog.writestringln('Disk Operation Complete');
-end;
-
-procedure register();
-begin
-    memset(uint32(@Hooks[0]), 0, sizeof(pp_hook_method)*MAX_HOOKS);
-    //isrmanager.registerISR(76, @Main);
-    //IDT.set_gate(76, uint32(@Main), $08, ISR_RING_0);
-end;
-
-procedure hook(hook_method : uint32);
-var
-    i : uint32;
-
-begin
-    for i:=0 to MAX_HOOKS-1 do begin
-        if uint32(Hooks[i]) = hook_method then exit;
-    end;
-    for i:=0 to MAX_HOOKS-1 do begin
-        if uint32(Hooks[i]) = 0 then begin
-            Hooks[i]:= pp_hook_method(hook_method);
-            exit;
-        end;
-    end;
-end;
-
-procedure unhook(hook_method : uint32);
-var
-    i : uint32;
-begin
-    for i:=0 to MAX_HOOKS-1 do begin
-        If uint32(Hooks[i]) = hook_method then Hooks[i]:= nil;
-        exit;
-    end;
-end;
-
-end.

src/driver/storage/Filesystems/asfs.pas

@@ -22,14 +22,17 @@ unit asfs;
 interface
 
 uses
-    storagemanagement,
-    util,
-    lmemorymanager,
-    strings,
+    syslog,
     lists,
-    tracer,
+    lmemorymanager,
+    rtc,
     serial,
-    rtc;
+    storagemanagement,
+    storagemanager,
+    strings,
+    stdio,
+    tracer,
+    util;
 
 type
 
@@ -98,7 +101,7 @@ begin
     filesystemRecord^.endOfData       := filesystemRecord.sectorsPerTable; 
     //filesystemRecord.volumeLabel     := config^
 
-    disk^.writecallback(disk, start, 1, buffer);
+    storagemanager.storage_write(disk, start, 1, buffer);
     memset(uint32(buffer), 0, disk^.sectorSize);
 
     fileEntry            := PFileEntry(buffer)[0];
@@ -111,7 +114,7 @@ begin
     fileEntry^.attributes := 0;
     fileEntry^.location   := 1;
 
-    disk^.writecallback(disk, start + 1, 1, buffer);
+    storagemanager.storage_write(disk, start + 1, 1, buffer);
 
 
 end;

src/driver/storage/Filesystems/filesystemmanager.pas

@@ -0,0 +1,120 @@
+{
+    Driver->Storage->FilesystemManager - Filesystem driver registry and routing.
+
+    Filesystem drivers (FAT32, FlatFS, etc.) register themselves here.
+    When VolumeManager discovers a volume, FilesystemManager probes it
+    against all registered filesystem drivers to detect the filesystem type.
+
+    @author(Aaron Hance <[email protected]>)
+}
+unit filesystemmanager;
+
+interface
+
+uses
+    lists,
+    lmemorymanager,
+    storagetypes,
+    strings,
+    tracer,
+    util;
+
+var
+    filesystems : PLinkedListBase;
+
+procedure init();
+procedure register_filesystem(filesystem : PFilesystem);
+function get_filesystem_count() : uint32;
+function get_filesystem(index : uint32) : PFilesystem;
+function find_filesystem_by_name(name : pchar) : PFilesystem;
+function find_filesystem_by_id(system_id : uint8) : PFilesystem;
+procedure probe_volume(volume : PStorage_Volume);
+
+implementation
+
+procedure init();
+begin
+    push_trace('FilesystemManager.init');
+    filesystems := LL_New(sizeof(TFilesystem));
+end;
+
+procedure register_filesystem(filesystem : PFilesystem);
+var
+    elm : void;
+begin
+    push_trace('FilesystemManager.register_filesystem');
+
+    elm := LL_Add(filesystems);
+    memcpy(uint32(filesystem), uint32(elm), sizeof(TFilesystem));
+end;
+
+function get_filesystem_count() : uint32;
+begin
+    get_filesystem_count := LL_Size(filesystems);
+end;
+
+function get_filesystem(index : uint32) : PFilesystem;
+begin
+    if index < LL_Size(filesystems) then
+        get_filesystem := PFilesystem(LL_Get(filesystems, index))
+    else
+        get_filesystem := nil;
+end;
+
+function find_filesystem_by_name(name : pchar) : PFilesystem;
+var
+    i  : uint32;
+    fs : PFilesystem;
+begin
+    push_trace('FilesystemManager.find_filesystem_by_name');
+    find_filesystem_by_name := nil;
+
+    for i := 0 to LL_Size(filesystems) - 1 do begin
+        fs := PFilesystem(LL_Get(filesystems, i));
+        if stringEquals(fs^.sName, name) then begin
+            find_filesystem_by_name := fs;
+            exit;
+        end;
+    end;
+end;
+
+function find_filesystem_by_id(system_id : uint8) : PFilesystem;
+var
+    i  : uint32;
+    fs : PFilesystem;
+begin
+    push_trace('FilesystemManager.find_filesystem_by_id');
+    find_filesystem_by_id := nil;
+
+    for i := 0 to LL_Size(filesystems) - 1 do begin
+        fs := PFilesystem(LL_Get(filesystems, i));
+        if fs^.system_id = system_id then begin
+            find_filesystem_by_id := fs;
+            exit;
+        end;
+    end;
+end;
+
+procedure probe_volume(volume : PStorage_Volume);
+var
+    i  : uint32;
+    fs : PFilesystem;
+begin
+    push_trace('FilesystemManager.probe_volume.enter');
+
+    { Try each registered filesystem's identify callback against this volume }
+    for i := 0 to LL_Size(filesystems) - 1 do begin
+        fs := PFilesystem(LL_Get(filesystems, i));
+        if fs^.identifyCallback <> nil then begin
+            push_trace('FilesystemManager.probe_volume.tryFS');
+            if fs^.identifyCallback(volume) then begin
+                volume^.filesystem := fs;
+                push_trace('FilesystemManager.probe_volume.found');
+                exit;
+            end;
+        end;
+    end;
+    push_trace('FilesystemManager.probe_volume.exit');
+end;
+
+end.