Fix file headers

- diskutil: add proc_pid global, diskutil_entry idle proc, create process
  on launch with setWindowOwner, kill on close, zero proc_pid in init
- notepad: add pid field to TNotepadState, notepad_entry idle proc, create
  process on launch with setWindowOwner, kill pid in doCloseWindow
- both apps now appear in PS and are manageable via KILL/TERMINATE

.gitignore

@@ -14,6 +14,6 @@ localenv.json
 /lvgl/
 dockerout.txt
 AGENTS.md
+lessons_learnt.md
 *.log
-/doc/*.md
-wasuro
+/doc/*.md

compile.sh

@@ -24,7 +24,6 @@ declare -a run_steps=(
 	"compile_stub.sh" "Failed to compile stub!"
 	"compile_vergen.sh" "Versions failed to compile"
 	"compile_lvgl.sh" "Failed to compile LVGL!"
-	"compile_wasuro.sh" "Failed to pull Wasuro!"
 	"compile_sources.sh" "Failed to compile FPC Sources!"
 	"compile_link.sh" "Failed linking!"
 	"compile_isogen.sh" "Failed to create ISO!"

compile_lvgl.sh

@@ -1,7 +1,7 @@
 #!/usr/bin/env bash
 # compile_lvgl.sh — Download LVGL v9.2 source and compile into lib/liblvgl.a
 # Clone & compile in /tmp (fast container-local fs).
-# Copy source + objects to /lvgl (host mount) for debugging.
+# Cache liblvgl.a on host mount (/code/lvgl/) to skip rebuild.
 set -e
 
 LVGL_VERSION="v9.2.2"
@@ -10,6 +10,7 @@ LVGL_DIR="/tmp/lvgl"
 OBJ_DIR="/tmp/lvgl_obj"
 CONF_DIR="$(pwd)/lvglh"
 OUT_DIR="$(pwd)/lib"
+CACHE_DIR="/code/lvgl"
 
 CC="gcc"
 CFLAGS="-m32 -march=i686 -ffreestanding \
@@ -26,6 +27,17 @@ echo " "
 echo "Compiling LVGL..."
 echo " "
 
+# If cached liblvgl.a exists on host mount, just copy it and skip everything
+if [ -f "${CACHE_DIR}/liblvgl.a" ]; then
+    echo "Found cached liblvgl.a in ${CACHE_DIR}, copying to ${OUT_DIR}..."
+    cp "${CACHE_DIR}/liblvgl.a" "${OUT_DIR}/liblvgl.a"
+    echo "(Delete lvgl/liblvgl.a to force a full rebuild.)"
+    echo " "
+    echo "LVGL compilation complete (cached)."
+    echo " "
+    exit 0
+fi
+
 # Clone LVGL into /tmp (container-local)
 rm -rf "$LVGL_DIR"
 echo "Downloading LVGL ${LVGL_VERSION}..."
@@ -105,14 +117,16 @@ else
     echo "No custom LVGL files in lvglh/."
 fi
 
-# Copy source + objects to /lvgl host mount for debugging
-echo "Copying LVGL source and objects to host mount..."
-mkdir /code/lvgl 2>/dev/null || true
-rm -rf /code/lvgl/* /code/lvgl/.[!.]* /code/lvgl/..?* 2>/dev/null || true
-cp -a "$LVGL_DIR/src" /code/lvgl/src
-cp -a "$OBJ_DIR" /code/lvgl/obj
+# Cache liblvgl.a and source to host mount for next build
+echo "Caching LVGL to host mount..."
+mkdir -p "$CACHE_DIR"
+rm -rf ${CACHE_DIR}/* ${CACHE_DIR}/.[!.]* ${CACHE_DIR}/..?* 2>/dev/null || true
+cp "${OUT_DIR}/liblvgl.a" "${CACHE_DIR}/liblvgl.a"
+cp -a "$LVGL_DIR/src" "${CACHE_DIR}/src"
+cp -a "$LVGL_DIR"/*.h "${CACHE_DIR}/" 2>/dev/null || true
+cp -a "$OBJ_DIR" "${CACHE_DIR}/obj"
 echo "Done."
 
 echo " "
 echo "LVGL compilation complete."
-echo " "
+echo " "

compile_sources.sh

@@ -4,7 +4,6 @@ echo "======================="
 echo " "
 echo "Compiling FPC Sources..."
 echo " "
-
 # Build -Fu flags for all directories under src/ and wasuro/
 FU_PATHS="-Fusrc -Fuwasuro"
 for dir in $(find src wasuro -type d 2>/dev/null); do

compile_wasuro.sh

@@ -1,43 +0,0 @@
-#!/usr/bin/env bash
-# compile_wasuro.sh — Pull Wasuro WASM runtime source into wasuro/
-# Clones the repo (sparse, src/wasm only) and copies the Pascal sources
-# into $PWD/wasuro so the FPC build can reference them via -Fu.
-set -e
-
-WASURO_REPO="https://gitea.spexeah.com/Spexeah/Wasuro.git"
-WASURO_BRANCH="develop"
-WASURO_TMP="/tmp/wasuro"
-WASURO_OUT="$(pwd)/wasuro"
-
-echo " "
-echo "======================="
-echo " "
-echo "Pulling Wasuro WASM runtime..."
-echo " "
-
-# Skip if wasuro/ already has .pas files (cached from previous build)
-if [ -n "$(find "${WASURO_OUT}" -name '*.pas' 2>/dev/null | head -1)" ]; then
-    echo "Wasuro sources already present in ${WASURO_OUT}, skipping pull."
-    echo " "
-    exit 0
-fi
-
-# Clone sparse checkout (only src/wasm)
-rm -rf "$WASURO_TMP"
-git clone --depth 1 --branch "${WASURO_BRANCH}" --filter=blob:none --sparse \
-    "${WASURO_REPO}" "${WASURO_TMP}" 2>&1
-cd "$WASURO_TMP"
-git sparse-checkout set src/wasm 2>&1
-cd -
-
-echo "Copying src/wasm to ${WASURO_OUT}..."
-rm -rf "$WASURO_OUT"
-mkdir -p "$WASURO_OUT"
-cp -a "${WASURO_TMP}/src/wasm/"* "$WASURO_OUT"/
-rm -rf "$WASURO_TMP"
-
-TOTAL=$(find "$WASURO_OUT" -name '*.pas' | wc -l)
-echo "Copied ${TOTAL} Pascal source files."
-echo " "
-echo "Wasuro pull complete."
-echo " "

doc/flatfs.md

@@ -0,0 +1,32 @@
+#Flat filesystem
+
+A super simple filesystem for asuro. Folders are emulated in filenames.
+
+Starts with disk info sector, sector 0 of volume
+
+---
+#### disk info
+
+jmp2boot        : ubit24;
+OEMName         : array[0..7] of char;
+version         : uint16 // numerical version of filesystem
+sectorCount      : uint16;
+fileCount       : uint16
+signature       : uint32 = 0x0B00B1E5
+
+
+the Rest of the sector is reserved
+
+---
+
+Starting from sector 1 is the file table. Table size is determined by entry size (64) * fileCount
+
+---
+####File entry
+
+name : array[0..59] of char //file name max 60 chars
+fileStart : 16bit // start sector of data
+fileSize : 16bit // data size in sectors
+
+---
+

iso/hello.txt

@@ -0,0 +1 @@
+Hello from the Asuro ISO!

src/contextswitcher.pas

@@ -29,14 +29,11 @@ unit contextswitcher;
 interface
 
 uses
-    idt, isrmanager, processmanager, proctypes, util, syslog, tracer;
+    idt, isrmanager, processmanager, proctypes, util, tracer;
 
 { Initialise: overwrite IDT gate 32 with our custom ISR. }
 procedure init;
 
-{ No idle ESP variable needed — idle is now a formal process (PID 0)
-  with its SavedESP managed like any other process. }
-
 implementation
 
 { -----------------------------------------------------------------------

src/driver/bus/PCI.pas

@@ -91,6 +91,7 @@ function getDeviceInfo(class_code : uint8; subclass_code : uint8; prog_if : uint
 procedure requestConfig(bus : uint8; slot : uint8; func : uint8; row : uint8);
 procedure writeConfig(bus: uint8; slot : uint8; func : uint8; row : uint8; val : uint32);
 procedure setBusMaster(bus : uint8; slot : uint8; func : uint8; master : boolean);
+procedure enableDevice(bus : uint8; slot : uint8; func : uint8);
 
 implementation 
 
@@ -442,4 +443,34 @@ begin
     pop_trace;
 end;
 
+//Enable device inturrupts and set bus master
+procedure enableDevice(bus : uint8; slot : uint8; func : uint8);
+var
+    addr : uint32;
+    cmd : uint32;
+begin
+    push_trace('PCI.enableDevice');
+
+    addr := ($1 shl 31);
+    addr := addr or (bus shl 16);
+    addr := addr or ((slot) shl 11);
+    addr := addr or ((func) shl 8);
+    addr := addr or ($04 and $FC);
+
+    outl(PCI_CONFIG_ADDRESS_PORT, addr);
+    cmd := inl(PCI_CONFIG_DATA_PORT);
+    cmd := cmd or PCI_COMMAND_MEM_SPACE;
+    cmd := cmd or PCI_COMMAND_BUS_MASTER;
+    cmd := cmd or (3 shl 1);
+
+    //enable interrupts, remove disable interrupt bit maybe
+    cmd := cmd and not PCI_COMMAND_INT_DISABLE;
+    // cmd := cmd and not (1 shl 9);
+
+    outl(PCI_CONFIG_ADDRESS_PORT, addr);
+    outl(PCI_CONFIG_DATA_PORT, cmd);
+
+    pop_trace;
+end;
+
 end.

src/driver/bus/usb/usbcore.pas

@@ -957,11 +957,14 @@ end;
 procedure usb_check_hotplug;
 var
     i    : uint32;
+    count: uint32;
     hc   : PUSBHCDriver;
     port : uint8;
 begin
     if HCList = nil then exit;
-    for i := 0 to LL_Size(HCList) - 1 do begin
+    count := LL_Size(HCList);
+    if count = 0 then exit;
+    for i := 0 to count - 1 do begin
         hc := PUSBHCDriver(LL_Get(HCList, i));
         if (hc <> nil) and hc^.PortChangePending then begin
             hc^.PortChangePending := false;

src/driver/hid/ps2/ps2_mouse.pas

@@ -119,8 +119,12 @@ var
     x32, y32 : sint32;
     r : pchar;
 begin
+    { mouse_wait(0) checks OBF with a short timeout (100 iterations).
+      When it returns true, data is ready — read it directly with inb($60).
+      Do NOT call mouse_read here: it uses mouse_wait_long (100k iterations)
+      and would spin-block the ISR if the next packet byte hasn't arrived yet. }
     while mouse_wait(0) do begin
-        b := mouse_read;
+        b := inb($60);
         if Cycle = 0 then begin
             if (b AND $08) = $08 then begin
                 Mouse_Byte[Cycle] := b;

src/driver/include/drivertypes.pas

@@ -21,6 +21,29 @@ unit drivertypes;
 
 interface
 
+const
+    PCI_CONFIG_ADDRESS_PORT = $0CF8;
+    PCI_CONFIG_DATA_PORT    = $0CFC;
+
+    PCI_COMMAND_IO_SPACE    = $0001;
+    PCI_COMMAND_MEM_SPACE   = $0002;
+    PCI_COMMAND_BUS_MASTER  = $0004;
+    PCI_COMMAND_SPECIAL_CYC = $0008;
+    PCI_COMMAND_MEM_WRITE   = $0010;
+    PCI_COMMAND_VGA_PALETTE = $0020;
+    PCI_COMMAND_PARITY      = $0040;
+    PCI_COMMAND_WAIT        = $0080;
+    PCI_COMMAND_SERR        = $0100;
+    PCI_COMMAND_FAST_BACK   = $0200;
+    PCI_COMMAND_INT_DISABLE = $0400;
+    PCI_COMMAND_SERR_ENABLE = $8000;
+
+    PCI_CAP_ID_MSI           = $05;
+
+    // Bits in the MSI Control register (16-bit):
+    MSI_CONTROL_ENABLE       = 1 shl 0;  // Bit 0
+    MSI_CONTROL_64BIT        = 1 shl 7;  // Bit 7
+    MSI_CONTROL_PVMASK       = 1 shl 8;  // Bit 8 (optional: per-vector masking)
 type
 
     PPCI_Device = ^TPCI_Device;
@@ -44,6 +67,7 @@ type
         address1       : uint32;
         address2       : uint32;
         address3       : uint32;
+
         address4       : uint32;
         address5       : uint32;
         CIS_pointer    : uint32;

src/driver/storage/ATA_ISR.pas

@@ -1,85 +0,0 @@
-//  Copyright 2021 Aaron Hance
-//
-//  Licensed under the Apache License, Version 2.0 (the "License");
-//  you may not use this file except in compliance with the License.
-//  You may obtain a copy of the License at
-//
-//  http://www.apache.org/licenses/LICENSE-2.0
-//
-//  Unless required by applicable law or agreed to in writing, software
-//  distributed under the License is distributed on an "AS IS" BASIS,
-//  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-//  See the License for the specific language governing permissions and
-//  limitations under the License.
-
-{ 
-	Drivers->Storage->ATA_ISR - Primary ATA IRQ.
-	
-	@author(Aaron Hance <[email protected]>)
-}
-unit ATA_ISR;
-
-interface
-
-uses
-    util,
-    syslog,
-    isr_types,
-    isrmanager,
-    IDT;
-
-procedure register();
-procedure hook(hook_method : uint32);
-procedure unhook(hook_method : uint32);
-
-implementation
-
-var
-    Hooks : Array[1..MAX_HOOKS] of pp_hook_method;
-
-procedure Main(); interrupt;
-var
-    i : integer;
-    
-begin
-    CLI;
-    for i:=0 to MAX_HOOKS-1 do begin
-        if uint32(Hooks[i]) <> 0 then Hooks[i](void($00000000));
-    end;
-    syslog.writestringln('Disk Operation Complete');
-end;
-
-procedure register();
-begin
-    memset(uint32(@Hooks[0]), 0, sizeof(pp_hook_method)*MAX_HOOKS);
-    //isrmanager.registerISR(76, @Main);
-    //IDT.set_gate(76, uint32(@Main), $08, ISR_RING_0);
-end;
-
-procedure hook(hook_method : uint32);
-var
-    i : uint32;
-
-begin
-    for i:=0 to MAX_HOOKS-1 do begin
-        if uint32(Hooks[i]) = hook_method then exit;
-    end;
-    for i:=0 to MAX_HOOKS-1 do begin
-        if uint32(Hooks[i]) = 0 then begin
-            Hooks[i]:= pp_hook_method(hook_method);
-            exit;
-        end;
-    end;
-end;
-
-procedure unhook(hook_method : uint32);
-var
-    i : uint32;
-begin
-    for i:=0 to MAX_HOOKS-1 do begin
-        If uint32(Hooks[i]) = hook_method then Hooks[i]:= nil;
-        exit;
-    end;
-end;
-
-end.

src/driver/storage/Filesystems/asfs.pas

@@ -22,14 +22,17 @@ unit asfs;
 interface
 
 uses
-    storagemanagement,
-    util,
-    lmemorymanager,
-    strings,
+    syslog,
     lists,
-    tracer,
+    lmemorymanager,
+    rtc,
     serial,
-    rtc;
+    storagemanagement,
+    storagemanager,
+    strings,
+    stdio,
+    tracer,
+    util;
 
 type
 
@@ -98,7 +101,7 @@ begin
     filesystemRecord^.endOfData       := filesystemRecord.sectorsPerTable; 
     //filesystemRecord.volumeLabel     := config^
 
-    disk^.writecallback(disk, start, 1, buffer);
+    storagemanager.storage_write(disk, start, 1, buffer);
     memset(uint32(buffer), 0, disk^.sectorSize);
 
     fileEntry            := PFileEntry(buffer)[0];
@@ -111,7 +114,7 @@ begin
     fileEntry^.attributes := 0;
     fileEntry^.location   := 1;
 
-    disk^.writecallback(disk, start + 1, 1, buffer);
+    storagemanager.storage_write(disk, start + 1, 1, buffer);
 
 
 end;

src/driver/storage/Filesystems/filesystemmanager.pas

@@ -0,0 +1,120 @@
+{
+    Driver->Storage->FilesystemManager - Filesystem driver registry and routing.
+
+    Filesystem drivers (FAT32, FlatFS, etc.) register themselves here.
+    When VolumeManager discovers a volume, FilesystemManager probes it
+    against all registered filesystem drivers to detect the filesystem type.
+
+    @author(Aaron Hance <[email protected]>)
+}
+unit filesystemmanager;
+
+interface
+
+uses
+    lists,
+    lmemorymanager,
+    storagetypes,
+    strings,
+    tracer,
+    util;
+
+var
+    filesystems : PLinkedListBase;
+
+procedure init();
+procedure register_filesystem(filesystem : PFilesystem);
+function get_filesystem_count() : uint32;
+function get_filesystem(index : uint32) : PFilesystem;
+function find_filesystem_by_name(name : pchar) : PFilesystem;
+function find_filesystem_by_id(system_id : uint8) : PFilesystem;
+procedure probe_volume(volume : PStorage_Volume);
+
+implementation
+
+procedure init();
+begin
+    push_trace('FilesystemManager.init');
+    filesystems := LL_New(sizeof(TFilesystem));
+end;
+
+procedure register_filesystem(filesystem : PFilesystem);
+var
+    elm : void;
+begin
+    push_trace('FilesystemManager.register_filesystem');
+
+    elm := LL_Add(filesystems);
+    memcpy(uint32(filesystem), uint32(elm), sizeof(TFilesystem));
+end;
+
+function get_filesystem_count() : uint32;
+begin
+    get_filesystem_count := LL_Size(filesystems);
+end;
+
+function get_filesystem(index : uint32) : PFilesystem;
+begin
+    if index < LL_Size(filesystems) then
+        get_filesystem := PFilesystem(LL_Get(filesystems, index))
+    else
+        get_filesystem := nil;
+end;
+
+function find_filesystem_by_name(name : pchar) : PFilesystem;
+var
+    i  : uint32;
+    fs : PFilesystem;
+begin
+    push_trace('FilesystemManager.find_filesystem_by_name');
+    find_filesystem_by_name := nil;
+
+    for i := 0 to LL_Size(filesystems) - 1 do begin
+        fs := PFilesystem(LL_Get(filesystems, i));
+        if stringEquals(fs^.sName, name) then begin
+            find_filesystem_by_name := fs;
+            exit;
+        end;
+    end;
+end;
+
+function find_filesystem_by_id(system_id : uint8) : PFilesystem;
+var
+    i  : uint32;
+    fs : PFilesystem;
+begin
+    push_trace('FilesystemManager.find_filesystem_by_id');
+    find_filesystem_by_id := nil;
+
+    for i := 0 to LL_Size(filesystems) - 1 do begin
+        fs := PFilesystem(LL_Get(filesystems, i));
+        if fs^.system_id = system_id then begin
+            find_filesystem_by_id := fs;
+            exit;
+        end;
+    end;
+end;
+
+procedure probe_volume(volume : PStorage_Volume);
+var
+    i  : uint32;
+    fs : PFilesystem;
+begin
+    push_trace('FilesystemManager.probe_volume.enter');
+
+    { Try each registered filesystem's identify callback against this volume }
+    for i := 0 to LL_Size(filesystems) - 1 do begin
+        fs := PFilesystem(LL_Get(filesystems, i));
+        if fs^.identifyCallback <> nil then begin
+            push_trace('FilesystemManager.probe_volume.tryFS');
+            if fs^.identifyCallback(volume) then begin
+                volume^.filesystem := fs;
+                push_trace('FilesystemManager.probe_volume.found');
+                exit;
+            end;
+        end;
+    end;
+    push_trace('FilesystemManager.probe_volume.exit');
+end;
+
+end.