Added licensing

# Conflicts:
#	src/include/lists.pas

.gitignore

@@ -10,5 +10,4 @@
 /*.sh~
 /*.img
 src/include/asuro.pas
-.vscode/launch.json
+localenv.json
-.vscode

.vscode/launch.json

@@ -3,18 +3,11 @@
         {
             "name":"Run",
             "request": "launch",
-            "type": "coreclr",
+            "type": "PowerShell",
             "preLaunchTask": "Build",
-            "program": "VBoxSDL",
+            "script": "${workspaceFolder}/virtualbox-wrapper.ps1",
-            "args": [
+            "args": ["-Command", "up"],
-                "--comment", 
-                "Asuro", 
-                "--startvm", 
-                "7d395c96-891c-4139-b77d-9b6b144b0b93"
-            ],
             "cwd": "${workspaceFolder}",
-            "console": "internalConsole",
-            "internalConsoleOptions": "neverOpen"
         }
     ]
 }

.vscode/tasks.json

@@ -9,14 +9,18 @@
             "command": "docker-compose",
             "args": [
                 "run",
-                "builder"
+                "builder",
             ],
             "type": "shell",
             "problemMatcher": [],
             "group": {
                 "kind": "build",
                 "isDefault": true
-            }
+            },
+            "dependsOn": [
+                "Close VirtualBox",
+                "Clean"
+            ]
         },
         {
             "label": "Build (Builder)",
@@ -26,6 +30,24 @@
                 "builder"
             ],
             "type": "shell"
+        },
+        {
+            "label": "Clean",
+            "command": "docker-compose",
+            "args": [
+                "down",
+                "--remove-orphans"
+            ],
+            "type": "shell"
+        },
+        {
+            "label": "Close VirtualBox",
+            "command": "./virtualbox-wrapper.ps1",
+            "args": [
+                "-Command", 
+                "down"
+            ],
+            "type": "shell"
         }
     ]
 }

doc/flatfs.md

@@ -0,0 +1,32 @@
+#Flat filesystem
+
+A super simple filesystem for asuro. Folders are emulated in filenames.
+
+Starts with disk info sector, sector 0 of volume
+
+---
+#### disk info
+
+jmp2boot        : ubit24;
+OEMName         : array[0..7] of char;
+version         : uint16 // numerical version of filesystem
+sectorCount      : uint16;
+fileCount       : uint16
+signature       : uint32 = 0x0B00B1E5
+
+
+the Rest of the sector is reserved
+
+---
+
+Starting from sector 1 is the file table. Table size is determined by entry size (64) * fileCount
+
+---
+####File entry
+
+name : array[0..59] of char //file name max 60 chars
+fileStart : 16bit // start sector of data
+fileSize : 16bit // data size in sectors
+
+---
+

docker-compose.yml

@@ -1,4 +1,3 @@
-version: "3.9"
 services:
   builder:
     build: .

readme.md

@@ -13,8 +13,8 @@ We welcome everyone to give building/breaking/fixing/shooting Asuro a go, feel f
     I don't think this needs an explaination.
 * [VSCode (Optional, but highly recommended)](https://code.visualstudio.com/)
     Visual Studio code is our IDE of choice, and we have a number of recommended plugins.
-    * [C# Plugin by Microsoft](https://marketplace.visualstudio.com/items?itemName=ms-dotnettools.csharp)
+    * [PowerShell Plugin by Microsoft](https://marketplace.visualstudio.com/items?itemName=ms-vscode.powershell)
-        This plugin gives you the ability to use the 'coreclr' task type, allowing the automatic launching of virtualbox with the resulting image generated during compilation of Asuro.
+        This plugin gives you the ability to use the 'PowerShell' task type, allowing the automatic launching of virtualbox with the resulting image generated during compilation of Asuro.
 * [VirtualBox](https://www.virtualbox.org/)
     Virtualbox is our Virtualisation environment of choice, don't ask why, it just is.
 
@@ -27,7 +27,7 @@ We welcome everyone to give building/breaking/fixing/shooting Asuro a go, feel f
 3. Install Docker for Windows.
 4. Install Git for Windows.
 5. Install VSCode & the listed plugins.
-6. Install VirtualBox.
+6. Install VirtualBox (v7+).
 7. Clone this repository.
 8. Run the following command in the root of the repo to build the docker image:
     ```powershell
@@ -50,32 +50,29 @@ We welcome everyone to give building/breaking/fixing/shooting Asuro a go, feel f
     ```xml
     <Machine uuid="{7d395c96-891c-4139-b77d-9b6b144b0b93}" name="Asuro" OSType="Linux" snapshotFolder="Snapshots" lastStateChange="2021-06-20T20:33:07Z">
     ```
-    Copy the uuid, in our case `7d395c96-891c-4139-b77d-9b6b144b0b93` and replace the uuid found in `.vscode\launch.json` under `args`, so that it looks something like this:
+    Copy the uuid, in our case `7d395c96-891c-4139-b77d-9b6b144b0b93` & create a `localenv.json` file in the project root with the following content:
     ```json
     {
-        "configurations": [
+        "VirtualBox":{
-            {
+            "MachineName":"<YOUR_UUID_OR_MACHINE_NAME>"
-                "name":"Run",
-                "request": "launch",
-                "type": "coreclr",
-                "preLaunchTask": "Build",
-                "program": "VBoxSDL",
-                "args": [
-                    "--comment", 
-                    "Asuro", 
-                    "--startvm", 
-                    "<YOUR UUID HERE>"
-                ],
-                "cwd": "${workspaceFolder}",
-                "console": "internalConsole",
-                "internalConsoleOptions": "neverOpen"
         }
-        ]
     }
     ```
     This will allow VSCode to automatically launch VirtualBox once Asuro has been compiled.
+    
+    You can also enable the serial adapter "COM1" in mode "Raw File", give it a path, and provide this path in the `localenv.json` as follows:
+    ```json
+    {
+        "VirtualBox" : {
+            "MachineName": "<YOUR_UUID_OR_MACHINE_NAME>",
+            "LogLocation": "Fully\\Qualified\\Path\\To\\Your\\Log\\File"
+        }
+    }
+    ```
+    This will allow you to see the console output from Asuro in your host terminal.
 13. Open your project folder in VSCode, use CTRL+SHIFT+B to build & F5 to build + run in VBox.
 14. Congratulations! You can now play with Asuro!
 
-### Gotchas
+### Notes & Gotchas
+- The above process has been updated to be compatible with VirtualBox 7+, in which VBoxSDL was removed and vboxmanage should be used in its place. A small wrapper powershell script is used to achieve this.
 - It was noted that Windows builds above `20H2` seem to have issues installing WSL2. We may have to wait for a patch from Microsoft to fix this. Our devs are currently using build `20H2`.

src/driver/storage/AHCI/AHCI.pas

@@ -0,0 +1,112 @@
+
+//  Copyright 2021 Aaron Hance
+//
+//  Licensed under the Apache License, Version 2.0 (the "License");
+//  you may not use this file except in compliance with the License.
+//  You may obtain a copy of the License at
+//
+//  http://www.apache.org/licenses/LICENSE-2.0
+//
+//  Unless required by applicable law or agreed to in writing, software
+//  distributed under the License is distributed on an "AS IS" BASIS,
+//  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+//  See the License for the specific language governing permissions and
+//  limitations under the License.
+
+{ 
+	Drivers->Storage->AHCI->AHCI - AHCI Driver.
+	
+	@author(Aaron Hance <[email protected]>)
+}
+unit AHCI;
+
+interface
+
+uses 
+    util,
+    PCI,
+    drivertypes,
+    drivermanagement,
+    lmemorymanager,
+    console,
+    vmemorymanager,
+    AHCITypes,
+    lists;
+
+var
+    ahciControllers : PDLList;
+
+procedure init();
+procedure load();
+
+implementation
+
+procedure init();
+var
+    devID : TDeviceIdentifier;
+begin
+    console.writestringln('AHCI: Registering driver');
+    devID.bus:= biPCI;
+    devID.id0:= idANY;
+    devID.id1:= $00000001;
+    devID.id2:= $00000006;
+    devID.id3:= $00000001;
+    devID.id4:= idANY;
+    devID.ex:= nil;
+    drivermanagement.register_driver('ATA/PI AHCI Driver', @devID, @load);
+    //TODO check IDE devices in ide for sata devices
+end;
+
+procedure check_ports(controller : PAHCI_Controller);
+var
+    i : uint32;
+    port : PHBA_Port;
+begin
+end;
+
+procedure load(ptr : void);
+var 
+    device : PPCI_Device;
+    controller : PAHCI_Controller;
+    i : uint32;
+    base : PHBA_Memory;
+begin
+    console.writestringln('AHCI: initilizing a new controller');
+
+    if ahciControllers = nil then begin
+        console.writestringln('AHCI: Initializing controller list');
+        ahciControllers := DL_New(SizeOf(TAHCI_Controller));
+    end;
+
+    device := PPCI_Device(ptr);
+
+    controller := DL_Add(ahciControllers);
+    controller^.device := device;
+
+    base: PHBA_Memory(kpalloc(device^.address5)); // get the base address of the controller
+    controller^.mio := base;
+
+    //enable AHCI mode, TODO check if is not already in AHCI mode and enable it, also perhaps remove if loaded as IDE
+    base^.ghc := base^.ghc or AHCI_CONTROLLER_MODE;
+
+    //clear any pending interrupts
+    base^.int_status := $FFFFFFFF;
+
+
+
+
+
+    // console.writestringln('AHCI: initilizing a new controller');
+    // ahciControllers[ahciControllerCount] := ptr;
+    // hba[ahciControllerCount] := PPCI_Device(ptr)^.address5;
+    // new_page_at_address(hba[ahciControllerCount]);
+
+    // //here would be any controller setup needed
+
+    // check_ports(ahciControllerCount);
+    // ahciControllerCount += 1;
+    // exit(true);
+end;
+
+
+end.

src/driver/storage/MBR.pas

@@ -0,0 +1,81 @@
+{
+    Driver->Storage->MBR Master boot record 
+
+    @author(Aaron Hance [email protected])
+}
+unit mbr;
+
+interface
+
+uses
+    tracer;
+
+type
+
+    PMaster_Boot_Record = ^TMaster_Boot_Record;
+    PPartition_table = ^TPartition_table;
+
+    TPartition_table = bitpacked record 
+        attributes     : uint8;
+        CHS_start      : array[0..2] of uint8;
+        system_id      : uint8;
+        CHS_end        : array[0..2] of uint8;
+        LBA_start      : uInt32;
+        sector_count   : uInt32;
+    end;
+
+    TMaster_Boot_Record = bitpacked record 
+        bootstrap   : array[0..439] of uint8;
+        signature   : uint32;
+        rsv         : uint16;
+        partition   : array[0..3] of TPartition_table;
+        boot_sector : uint16;
+    end;
+
+    T24bit = array[0..2] of uint8;
+
+    function get_bootable(partition_table : PPartition_table) : boolean;
+    procedure set_bootable(partition_table : PPartition_table);
+    procedure setup_partition(partition_table : PPartition_table; address : uint32; sectorSize : uint32);
+
+implementation
+
+{ convert LBA address to CHS address}
+function LBA_2_CHS(lba : uint32) : T24bit;
+var
+    dat : T24bit;
+begin
+  //TODO impliment procedure
+  LBA_2_CHS := dat;
+end;
+
+{ Set a partition struct to be bootable}
+procedure set_bootable(partition_table : PPartition_table);
+begin
+    push_trace('MBR.set_bootable');
+    //set the bootble bit in attributes
+    partition_table^.attributes := (partition_table^.attributes and $80);
+end;
+
+{ Check a partitions bootable bit }
+function get_bootable(partition_table : PPartition_table) : boolean;
+begin
+    push_trace('MBR.get_bootable');
+    //get the bootble bit in attributes
+    get_bootable := (partition_table^.attributes and $80) = $80;
+end;
+
+{ Setup a partition table struct }
+procedure setup_partition(partition_table : PPartition_table; address : uint32; sectorSize : uint32);
+begin
+    push_trace('MBR.setup_partition');
+    //set values in both LBA and CHS addressing schemes
+    partition_table^.LBA_start := address;
+    partition_table^.sector_count := sectorSize;
+    partition_table^.CHS_start := LBA_2_CHS(address);
+    partition_table^.CHS_start := LBA_2_CHS(address + sectorSize);  
+    push_trace('MBR.setup_partition.end');
+end;
+
+
+end.

src/driver/storage/fat32.pas

@@ -10,14 +10,16 @@ interface
 
 uses
     console,
-    storagemanagement,
+    util,
-    util, terminal,
+    terminal,
     lmemorymanager,
     strings,
     lists,
     tracer,
     serial,
-    rtc;
+    rtc,
+    volumemanager,
+    storagetypes;
 
 type 
 
@@ -89,7 +91,7 @@ var
     filesystem : TFilesystem;
 
 procedure init;
-procedure create_volume(disk : PStorage_Device; sectors : uint32; start : uint32; config : puint32);
+procedure create_volume(volume : PStorage_Volume; sectors : uint32; start : uint32; config : puint32);
 procedure detect_volumes(disk : PStorage_Device);
 //function writeDirectory(volume : PStorage_volume; directory : pchar; attributes : uint32) : uint8; // need to handle parent table cluster overflow, need to take attributes
 //function readDirectory(volume : PStorage_volume; directory : pchar; listPtr : PLinkedListBase) : uint8; //returns: 0 = success, 1 = dir not exsist, 2 = not directory, 3 = error
@@ -751,7 +753,7 @@ end;
 
 //TODO check directory commands for errors with a clean disk
 
-procedure create_volume(disk : PStorage_Device; sectors : uint32; start : uint32; config : puint32);
+procedure create_volume(volume : PStorage_Volume; sectors : uint32; start : uint32; config : puint32);
 var
     buffer     : puint32;
     bt: puint32;
@@ -772,9 +774,18 @@ var
     programFileArray   : byteArray8 = ('P','R','O','G','R','A','M','S');
     rootCluster   : uint32 = 1;
 
+    sysArray : byteArray8 = ('S','Y','S','T','E','M',' ',' ');
+    progArray : byteArray8 = ('P','R','O','G','R','A','M','S');
+    userArray : byteArray8 = ('U','S','E','R',' ',' ',' ',' ');
+
+    status : puint32;
+    disk : PStorage_device;
+
 begin //maybe increase buffer size by one?
     push_trace('fat32.create_volume()');
 
+    disk := volume^.device;
+
     // zeroBuffer:= puint32(kalloc( disk^.sectorSize * 4 ));
     // memset(uint32(zeroBuffer), 0, disk^.sectorSize * 4);
 
@@ -811,7 +822,7 @@ begin //maybe increase buffer size by one?
     bootRecord^.jmp2boot        := $0; //TODO impliment boot jump
     bootRecord^.OEMName         := asuroArray;
     bootRecord^.sectorSize      := disk^.sectorsize;
-    bootRecord^.spc             := config^;
+    bootRecord^.spc             := 1;
     bootRecord^.rsvSectors      := 32; //32 is standard
     bootRecord^.numFats         := 1;
     bootRecord^.mediaDescp      := $F8;
@@ -873,8 +884,16 @@ begin //maybe increase buffer size by one?
     
     disk^.writecallback(disk, dataStart + (config^ * rootCluster), 1, buffer);
 
+    memset(uint32(buffer), 0, disk^.sectorsize);
+
+    status := puint32(kalloc(sizeof(uint32)));
+    writeDirectory(volume, '', sysArray, $10, status, '');
+
+
     kfree(buffer);
 
+
+
 end;
 
 procedure detect_volumes(disk : PStorage_Device);
@@ -903,11 +922,11 @@ begin
     if (puint32(buffer)[127] = $55AA) and (PBootRecord(buffer)^.bsignature = $29) then begin //TODO partition table
         console.writestringln('FAT32: volume found!');
         volume^.device:= disk;
-        volume^.sectorStart:= 1;
+        volume^.sectorStart:= 1; //THIS MAKE SURE IF NOT FUCKY, cos im getting info from 2
         volume^.sectorSize:= PBootRecord(buffer)^.sectorSize;
         volume^.freeSectors:= 1000000; //TODO implement get free sectors need FSINFO implemented first
         volume^.filesystem := @filesystem;
-        storagemanagement.register_volume(disk, volume);
+        // storagemanagement.register_volume(disk, volume); TODO repalce with new thing
     end;
 
     kfree(buffer);
@@ -917,6 +936,7 @@ procedure init();
 begin
     push_trace('fat32.init()');
     filesystem.sName:= 'FAT32'; 
+    filesystem.system_id:= $01; 
     filesystem.readDirCallback:= @readDirectoryGen;
     filesystem.createDirCallback:= @writeDirectoryGen;
     filesystem.createcallback:= @create_volume;
@@ -924,7 +944,7 @@ begin
     filesystem.writecallback:= @writeFile;
     filesystem.readcallback := @readFile;
 
-    storagemanagement.register_filesystem(@filesystem);
+    volumemanager.register_filesystem(@filesystem);
 end;
 
 end.

src/driver/storage/idetypes.pas

@@ -0,0 +1,148 @@
+//  Copyright 2021 Aaron Hance
+//
+//  Licensed under the Apache License, Version 2.0 (the "License");
+//  you may not use this file except in compliance with the License.
+//  You may obtain a copy of the License at
+//
+//  http://www.apache.org/licenses/LICENSE-2.0
+//
+//  Unless required by applicable law or agreed to in writing, software
+//  distributed under the License is distributed on an "AS IS" BASIS,
+//  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+//  See the License for the specific language governing permissions and
+//  limitations under the License.
+
+{ 
+	Driver->Storage->IDE->idetypes - IDE device types and constants.
+	
+	@author(Aaron Hance <[email protected]>)
+}
+unit idetypes;
+
+interface
+
+const
+
+    ATA_SR_BUSY = $80; //BUSY
+    ATA_SR_DRDY = $40; //DRIVE READY
+    ATA_SR_DF   = $20; //DRIVE WRITE FAULT
+    ATA_SR_DSC  = $10; //DRIVE SEEK COMPLETE
+    ATA_SR_DRQ  = $08; //DATA REQUEST READY
+    ATA_SR_CORR = $04; //CORRECTED DATA
+    ATA_SR_IDX  = $02; //INLEX
+    ATA_SR_ERR  = $01; //ERROR
+
+    ATA_ER_BBK   = $80; //BAD SECTOR
+    ATA_ER_UNC   = $40; //UNCORRECTABLE DATA
+    ATA_ER_MC    = $20; //NO MEDIA
+    ATA_ER_IDNF  = $10; //ID MARK NOT FOUND
+    ATA_ER_MCR   = $08; //NO MEDIA
+    ATA_ER_ABRT  = $04; //COMMAND ABORTED
+    ATA_ER_TK0NF = $02; //TRACK 0 NOT FOUND
+    ATA_ER_AMNF  = $01; //NO ADDRESS MARK
+
+    ATA_CMD_READ_PIO        = $20; 
+    ATA_CMD_READ_PIO_EXT    = $24; 
+    ATA_CMD_READ_DMA        = $C8; 
+    ATA_CMD_READ_DMA_EXT    = $25; 
+    ATA_CMD_WRITE_PIO       = $30; 
+    ATA_CMD_WRITE_PIO_EXT   = $34; 
+    ATA_CMD_WRITE_DMA       = $CA; 
+    ATA_CMD_WRITE_DMA_EXT   = $35; 
+    ATA_CMD_CACHE_FLUSH     = $E7; 
+    ATA_CMD_CACHE_FLUSH_EXT = $EA; 
+    ATA_CMD_PACKET          = $A0; 
+    ATA_CMD_IDENTIFY_PACKET = $A1; 
+    ATA_CMD_IDENTIFY        = $EC; 
+
+    ATAPI_CMD_READ  = $A8;
+    ATAPI_CMD_EJECT = $1B;
+
+    ATA_IDENT_DEVICETYPE   = $0;    
+    ATA_IDENT_CYLINDERS    = $2;    
+    ATA_IDENT_HEADS        = $6;    
+    ATA_IDENT_SECOTRS      = $12;    
+    ATA_IDENT_SERIAL       = $20;    
+    ATA_IDENT_MODEL        = $54;    
+    ATA_IDENT_CAPABILITIES = $98;    
+    ATA_IDENT_FIELDVALID   = $106;   
+    ATA_IDENT_MAX_LBA      = $120;   
+    ATA_IDENT_COMMANDSETS  = $164;       
+    ATA_IDENT_MAX_LBA_EXT  = $200;
+
+    ATA_REG_DATA       = $00;
+    ATA_REG_ERROR      = $01;
+    ATA_REG_FEATURES   = $01;
+    ATA_REG_SECCOUNT  = $02;
+    ATA_REG_LBA0       = $03;
+    ATA_REG_LBA1       = $04;
+    ATA_REG_LBA2       = $05;
+    ATA_REG_HDDEVSEL   = $06;
+    ATA_REG_COMMAND    = $07;
+    ATA_REG_STATUS     = $07;
+    ATA_REG_SECCOUNT1  = $08;
+    ATA_REG_LBA3       = $09;
+    ATA_REG_LBA4       = $0A;
+    ATA_REG_LBA5       = $0B;
+    ATA_REG_CONTROL    = $0C; //1FC on some systems, 3F6 on all
+    ATA_REG_ALTSTATUS  = $0C;
+    ATA_REG_DEVADDRESS = $0D; 
+
+    ATA_DEVICE_MASTER = $A0;
+    ATA_DEVICE_SLAVE = $B0;
+
+    ATA_PRIMARY_BASE = $1F0;
+    ATA_PRIMARY_BASE1 = $3F6;
+    ATA_SECONDARY_BASE = $170; //todo check this
+    ATA_SECONDARY_BASE1 = $376; //todo check this
+
+    ATA_INTERRUPT_PRIMARY = $3F6;
+    ATA_INTERRUPT_SECONDARY = $376;
+
+type
+    TPortMode = (P_READ, P_WRITE);
+
+    TIdentResponse = array[0..255] of uint16;
+    PIdentResponse = ^TIdentResponse;
+
+    TIDE_Channel_Registers = record
+        base    : uint16;
+        ctrl    : uint16;
+        bmide   : uint16;
+        noInter : uint8
+    end;
+
+    TIDE_Status = bitpacked record 
+        Busy  : Boolean;
+        Ready : Boolean;
+        Fault : Boolean;
+        Seek  : Boolean;
+        DRQ   : Boolean;
+        CORR  : Boolean;
+        IDDEX : Boolean;
+        ERROR : Boolean;
+    end;
+    PIDE_Status = ^TIDE_Status;
+
+    TIDE_Device = record
+        exists       : boolean;
+        isPrimary    : boolean;
+        isMaster     : boolean;
+        isATAPI      : boolean;
+        status       : TIDE_Status;
+        base         : uint16;
+        blockSize    : uint32;
+        info         : PIdentResponse;
+    end;
+
+    TIDE_PACKET = record
+        command : uint8;
+        lba     : uint32;
+        count   : uint8;
+        buffer  : puint16;
+    end;
+
+
+implementation
+  
+end.

src/driver/storage/storagetypes.pas

@@ -0,0 +1,64 @@
+//  Copyright 2021 Aaron Hance
+//
+//  Licensed under the Apache License, Version 2.0 (the "License");
+//  you may not use this file except in compliance with the License.
+//  You may obtain a copy of the License at
+//
+//  http://www.apache.org/licenses/LICENSE-2.0
+//
+//  Unless required by applicable law or agreed to in writing, software
+//  distributed under the License is distributed on an "AS IS" BASIS,
+//  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+//  See the License for the specific language governing permissions and
+//  limitations under the License.
+
+{ 
+	Driver->Storage->Include->storagetypes - Structs & Data Shared Across Storage Drivers.
+	
+	@author(Aaron Hance <[email protected]>)
+}
+unit storagetypes;
+
+interface
+
+uses
+    lists;
+
+type
+
+    TControllerType = (ControllerATA, ControllerATAPI, ControllerUSB, ControllerAHCI, 
+        ControllerNET, ControllerRAM, rsvctr1, rsvctr2, rsvctr3);
+
+    PStorage_device = ^TStorage_Device;
+    PDrive_Error    = ^TDrive_Error;
+
+    PPHIOHook = procedure(drive : PStorage_device; addr : uint32; sectors : uint32; buffer : puint32);
+    PPHIOHook_ = procedure;
+
+    byteArray8 = array[0..7] of char;
+    PByteArray8 = ^byteArray8;
+
+    { Generic storage device }
+    TStorage_Device = record
+        id               : uint8;
+        controller       : TControllerType;
+        controllerId0    : uint32;
+        writable         : boolean;
+        volumes          : PLinkedListBase;
+        writeCallback    : PPHIOHook;
+        readCallback     : PPHIOHook;
+        maxSectorCount   : uint32;
+        sectorSize       : uint32;
+    end;
+
+    TDrive_Error = record 
+        code : uint16;
+        description : pchar;
+        recoverable : boolean;
+    end;
+
+
+implementation
+
+
+end.