vfs: symlink support in file picker, test cleanup, boot mount fix

- File picker (app.filepicker.pas): add otSYMLINK to directory case in
  fp_collect_cb so symlinks like /sys appear as navigable directories
- VFS: add RemoveVirtualTree() to recursively free vdir/symlink trees
- VFS UnitTest: clean up /utest_vfs tree after all tests
- STORTEST: clean up /st_test tree after tests, fix listing leak in
  cmd_stortest (GetDirectoryListingFrom result was never freed)
- Boot mount: auto-mount boot drive at /boot via mountVolume() instead
  of symlink; remove /boot and /cfg from init() vdirs
- mount.asr: remove boot line (now only 'mnt {device}/sys /sys')

iso/mount.asr

@@ -0,0 +1 @@
+mnt {device}/sys /sys

src/app/app.edit.pas

@@ -138,7 +138,7 @@ begin
 
     { Open for writing }
     debug.tracer.push_trace('edit.SaveFile.openRW');
-    fHandle := driver.storage.vfs.OpenFile(FilePath, omReadWrite, wmRewrite, @fError);
+    fHandle := driver.storage.vfs.OpenFile(FilePath, omReadWrite, @fError);
     if fHandle <> 0 then begin
         debug.tracer.push_trace('edit.SaveFile.writeFile');
         driver.storage.vfs.WriteFile(fHandle, 0, puint8(buf), totalLen);
@@ -149,7 +149,7 @@ begin
     end else begin
         { Try write-only for new file }
         debug.tracer.push_trace('edit.SaveFile.openWO');
-        fHandle := driver.storage.vfs.OpenFile(FilePath, omWriteOnly, wmNew, @fError);
+        fHandle := driver.storage.vfs.OpenFile(FilePath, omCreate, @fError);
         if fHandle <> 0 then begin
             debug.tracer.push_trace('edit.SaveFile.writeFileNew');
             driver.storage.vfs.WriteFile(fHandle, 0, puint8(buf), totalLen);
@@ -181,7 +181,7 @@ begin
     if FilePath = nil then exit;
 
     debug.tracer.push_trace('edit.LoadFile.openFile');
-    fHandle := driver.storage.vfs.OpenFile(FilePath, omReadOnly, wmRewrite, @fError);
+    fHandle := driver.storage.vfs.OpenFile(FilePath, omRead, @fError);
     debug.tracer.push_trace('edit.LoadFile.openFile.done');
     if (fHandle = 0) or (fError <> eNone) then begin
         io.syslog.writestringln('New file.');

src/app/app.filepicker.pas

@@ -77,12 +77,15 @@ type
     { Flat name buffer — heap-alloc'd in do_refresh to avoid stack bloat }
     TNameBuf  = array[0..ENTRY_MAX - 1] of pchar;
     PNameBuf  = ^TNameBuf;
+    TSizeBuf  = array[0..ENTRY_MAX - 1] of uint32;
+    PSizeBuf  = ^TSizeBuf;
 
     { Per-call context passed to the forEach collect callback }
     PFPCollectCtx = ^TFPCollectCtx;
     TFPCollectCtx = record
         dir_names  : PNameBuf;
         file_names : PNameBuf;
+        file_sizes : PSizeBuf;
         dir_count  : uint32;
         file_count : uint32;
         filter     : pchar;
@@ -350,6 +353,28 @@ begin
     end;
 end;
 
+{ Insertion sort on name array, swapping a parallel size array in lockstep }
+procedure sortNamesWithSizes(var names: array of pchar; var sizes: array of uint32; n: uint32);
+var
+    i, j  : uint32;
+    tmpN  : pchar;
+    tmpS  : uint32;
+begin
+    if n < 2 then exit;
+    for i := 1 to n - 1 do begin
+        tmpN := names[i];
+        tmpS := sizes[i];
+        j    := i;
+        while (j > 0) and strLess(tmpN, names[j - 1]) do begin
+            names[j] := names[j - 1];
+            sizes[j] := sizes[j - 1];
+            j := j - 1;
+        end;
+        names[j] := tmpN;
+        sizes[j] := tmpS;
+    end;
+end;
+
 { ============================================================
   fp_collect_cb
   core.ds.hashmap.forEach callback: classifies each VFS entry as dir or file
@@ -364,7 +389,7 @@ begin
     obj := PVFSObject(data);
     if (ctx = nil) or (obj = nil) then exit;
     case obj^.ObjectType of
-        otVDIRECTORY, otDRIVE, otDIRECTORY, otMOUNT:
+        otVDIRECTORY, otDRIVE, otDIRECTORY, otMOUNT, otSYMLINK:
             if ctx^.dir_count < ENTRY_MAX then begin
                 ctx^.dir_names^[ctx^.dir_count] := key;
                 ctx^.dir_count := ctx^.dir_count + 1;
@@ -373,6 +398,7 @@ begin
             if matchesFilter(key, ctx^.filter) then
                 if ctx^.file_count < ENTRY_MAX then begin
                     ctx^.file_names^[ctx^.file_count] := key;
+                    ctx^.file_sizes^[ctx^.file_count] := obj^.FileSize;
                     ctx^.file_count := ctx^.file_count + 1;
                 end;
     end;
@@ -390,12 +416,14 @@ var
     ctx        : TFPCollectCtx;
     dir_names  : PNameBuf;   { heap-alloc'd to avoid blowing the core.version stack }
     file_names : PNameBuf;
+    file_sizes : PSizeBuf;
     dir_count  : uint32;
     file_count : uint32;
     i          : uint32;
     row, name_lbl, size_lbl : Plv_obj;
     sep        : pchar;
     copy       : pchar;
+    szStr      : pchar;
     s1, s2, s3 : pchar;
 begin
     debug.tracer.push_trace('filepicker.do_refresh');
@@ -408,8 +436,10 @@ begin
     io.syslog.logln('FPCIK', 'do_refresh: kalloc name bufs');
     dir_names  := PNameBuf(kalloc(sizeof(TNameBuf)));
     file_names := PNameBuf(kalloc(sizeof(TNameBuf)));
+    file_sizes := PSizeBuf(kalloc(sizeof(TSizeBuf)));
     memset(uint32(dir_names),  0, sizeof(TNameBuf));
     memset(uint32(file_names), 0, sizeof(TNameBuf));
+    memset(uint32(file_sizes), 0, sizeof(TSizeBuf));
 
     { Sync path bar }
     if p^.path_bar <> nil then
@@ -429,6 +459,7 @@ begin
             lv_label_set_text(p^.status_label, 'Could not read directory');
         kfree(void(dir_names));
         kfree(void(file_names));
+        kfree(void(file_sizes));
         debug.tracer.pop_trace;
         exit;
     end;
@@ -437,6 +468,7 @@ begin
         driver.storage.vfs.FreeDirectoryListing(Map);
         kfree(void(dir_names));
         kfree(void(file_names));
+        kfree(void(file_sizes));
         debug.tracer.pop_trace;
         exit;
     end;
@@ -444,6 +476,7 @@ begin
 
     ctx.dir_names  := dir_names;
     ctx.file_names := file_names;
+    ctx.file_sizes := file_sizes;
     ctx.dir_count  := 0;
     ctx.file_count := 0;
     ctx.filter     := p^.filter;
@@ -455,7 +488,7 @@ begin
 
     { --- Sort both collections alphabetically --- }
     if dir_count  > 0 then sortNames(dir_names^,  dir_count);
-    if file_count > 0 then sortNames(file_names^, file_count);
+    if file_count > 0 then sortNamesWithSizes(file_names^, file_sizes^, file_count);
 
     { --- Build directory rows --- }
     if dir_count > 0 then
@@ -524,10 +557,11 @@ begin
         lv_obj_set_style_text_color(name_lbl, lv_color_make(210, 215, 230), 0);
         lv_obj_set_style_text_font(name_lbl, @lv_font_montserrat_14, 0);
 
-        { File size column: skipped here to avoid blocking disk I/O
+        { File size column: use metadata from directory listing }
-          inside the LVGL timer callback context. }
         size_lbl := lv_label_create(row);
-        lv_label_set_text(size_lbl, '--');
+        szStr := fmtFileSize(file_sizes^[i]);
+        lv_label_set_text(size_lbl, szStr);
+        kfree(void(szStr));
         lv_obj_set_width(size_lbl, 70);
         lv_obj_set_style_text_color(size_lbl, lv_color_make(100, 110, 130), 0);
         lv_obj_set_style_text_font(size_lbl, @lv_font_montserrat_14, 0);
@@ -543,6 +577,7 @@ begin
 
     kfree(void(dir_names));
     kfree(void(file_names));
+    kfree(void(file_sizes));
 
     { Update status label: "X dirs, Y files" }
     if p^.status_label <> nil then begin

src/app/app.inio.pas

@@ -65,7 +65,7 @@ begin
 
     { ---- READ ---- }
     if op[0] = '<' then begin
-        fHandle := driver.storage.vfs.OpenFile(absPath, omReadOnly, wmRewrite, @fError);
+        fHandle := driver.storage.vfs.OpenFile(absPath, omRead, @fError);
         if (fHandle = 0) or (fError <> eNone) then begin
             io.syslog.writestringln('Error: cannot open file for reading.');
             kfree(void(absPath));
@@ -112,10 +112,10 @@ begin
         contentLen := stringSize(content);
 
         { Try read-write rewrite first (existing file) }
-        fHandle := driver.storage.vfs.OpenFile(absPath, omReadWrite, wmRewrite, @fError);
+        fHandle := driver.storage.vfs.OpenFile(absPath, omReadWrite, @fError);
         if (fHandle = 0) or (fError <> eNone) then begin
             { Try creating new file }
-            fHandle := driver.storage.vfs.OpenFile(absPath, omWriteOnly, wmNew, @fError);
+            fHandle := driver.storage.vfs.OpenFile(absPath, omCreate, @fError);
         end;
 
         if (fHandle = 0) or (fError <> eNone) then begin

src/app/app.notepad.pas

@@ -372,9 +372,9 @@ begin
     buf := pchar(kalloc(FILE_BUF_SIZE));
     memset(uint32(buf), 0, FILE_BUF_SIZE);
     memcpy(uint32(txt), uint32(buf), len);
-    fHandle := driver.storage.vfs.OpenFile(state^.currentPath, omReadWrite, wmRewrite, @fError);
+    fHandle := driver.storage.vfs.OpenFile(state^.currentPath, omReadWrite, @fError);
     if fHandle = 0 then
-        fHandle := driver.storage.vfs.OpenFile(state^.currentPath, omWriteOnly, wmNew, @fError);
+        fHandle := driver.storage.vfs.OpenFile(state^.currentPath, omCreate, @fError);
     if fHandle = 0 then begin
         kfree(void(buf));
         io.syslog.logln('NOTEPAD', 'saveFile: OpenFile failed');
@@ -413,7 +413,7 @@ var
     buf     : pchar;
 begin
     debug.tracer.push_trace('notepad.loadFile');
-    fHandle := driver.storage.vfs.OpenFile(path, omReadOnly, wmRewrite, @fError);
+    fHandle := driver.storage.vfs.OpenFile(path, omRead, @fError);
     if (fHandle = 0) or (fError <> eNone) then begin
         io.syslog.logln('NOTEPAD', 'loadFile: could not open file');
         showErrorMsgbox('Open Failed', 'Could not open file for reading.');

src/app/app.vterminal.pas

@@ -343,7 +343,7 @@ begin
         end;
     end;
     { Resolve relative to per-terminal cwd }
-    Validity := driver.storage.vfs.changeDirectoryFrom(Path, state^.cwd, NewDir);
+    Validity := driver.storage.vfs.ChangeDirectoryFrom(Path, state^.cwd, NewDir);
     case Validity of
         pvDirectory: begin
             kfree(void(state^.cwd));
@@ -410,7 +410,7 @@ var
 begin
     if STRLL_Size(state^.dir_stack) > 0 then begin
         wd := STRLL_Get(state^.dir_stack, STRLL_Size(state^.dir_stack) - 1);
-        Validity := driver.storage.vfs.changeDirectoryFrom(wd, state^.cwd, NewDir);
+        Validity := driver.storage.vfs.ChangeDirectoryFrom(wd, state^.cwd, NewDir);
         if Validity = pvDirectory then begin
             kfree(void(state^.cwd));
             state^.cwd := NewDir;
@@ -696,7 +696,7 @@ begin
             end;
         end else begin
             { No built-in command found — try file dispatch }
-            absPath := driver.storage.vfs.makeAbsolutePathFrom(params^.Param, state^.cwd);
+            absPath := driver.storage.vfs.MakeAbsolutePathFrom(params^.Param, state^.cwd);
             if absPath <> nil then begin
                 if is_bg then begin
                     { Background file dispatch }

src/app/wasm/app.wasm.runner.pas

@@ -152,36 +152,35 @@ var
     fh       : TFileHandle;
     err      : TError;
     fsize    : uint32;
-    errb     : uint8;
     bytesRead : uint32;
     processCtx : PProcessContext;
 begin
     debug.tracer.push_trace('wasmrunner.handler');
     wasm_file_handler := 0;
 
-    { 1. Get file size }
+    { 1. Open file once — omRead pre-loads the data and gives us the size }
-    errb := 0;
+    err := eNone;
-    fsize := driver.storage.vfs.FileSize(path, @errb);
+    fh := driver.storage.vfs.OpenFile(path, omRead, @err);
-    if (fsize = 0) or (errb <> 0) then begin
+    if (fh = 0) or (err <> eNone) then begin
-        io.stdio.bufWriteStrLn(stderr_buf, 'WASM: cannot determine file size');
+        io.stdio.bufWriteStrLn(stderr_buf, 'WASM: cannot open file');
+        exit;
+    end;
+
+    fsize := driver.storage.vfs.FileSizeFromHandle(fh);
+    if fsize = 0 then begin
+        driver.storage.vfs.CloseFile(fh);
+        io.stdio.bufWriteStrLn(stderr_buf, 'WASM: file is empty or cannot determine size');
         exit;
     end;
 
     { 2. Allocate buffer and read file }
     buf := puint8(kalloc(fsize));
     if buf = nil then begin
+        driver.storage.vfs.CloseFile(fh);
         io.stdio.bufWriteStrLn(stderr_buf, 'WASM: out of memory');
         exit;
     end;
 
-    err := eNone;
-    fh := driver.storage.vfs.OpenFile(path, omReadOnly, wmRewrite, @err);
-    if fh = 0 then begin
-        kfree(void(buf));
-        io.stdio.bufWriteStrLn(stderr_buf, 'WASM: cannot open file');
-        exit;
-    end;
-
     bytesRead := driver.storage.vfs.ReadFile(fh, 0, buf, fsize);
     driver.storage.vfs.CloseFile(fh);
 

src/arch/x86/arch.x86.panic.pas

@@ -0,0 +1,84 @@
+{
+    arch.x86.panic - x86-specific kernel panic bridge.
+
+    Reads the saved interrupt register state (IntReg, IntErr, IntSpec)
+    and packs it into a TRegisterSnapshot, then delegates to
+    core.panic.panic() for architecture-agnostic display and halt.
+
+    @author(Kieron Morris <[email protected]>)
+}
+unit arch.x86.panic;
+
+interface
+
+uses
+    core.panic;
+
+{ Register the x86 halt procedure with core.panic. Call after LVGL init. }
+procedure init;
+
+{ Build a register snapshot from IntReg/IntErr/IntSpec and trigger panic.
+  Must be called AFTER correctInterruptRegisters(). }
+procedure x86_panic(fault : pchar; info : pchar);
+
+implementation
+
+uses
+    arch.x86.util,
+    arch.x86.isr.types;
+
+{ Helper: add a register entry to the snapshot and increment count. }
+procedure addEntry(var snap : TRegisterSnapshot; name : pchar; value : uint32);
+begin
+    if snap.Count < MAX_REGISTER_ENTRIES then begin
+        snap.Entries[snap.Count].Name := name;
+        snap.Entries[snap.Count].Value := value;
+        Inc(snap.Count);
+    end;
+end;
+
+procedure x86_panic(fault : pchar; info : pchar);
+var
+    snap : TRegisterSnapshot;
+begin
+    snap.Count := 0;
+
+    { Pack general-purpose registers from the saved interrupt frame }
+    if IntReg <> nil then begin
+        addEntry(snap, 'EBP', IntReg^.EBP);
+        addEntry(snap, 'EAX', IntReg^.EAX);
+        addEntry(snap, 'EBX', IntReg^.EBX);
+        addEntry(snap, 'ECX', IntReg^.ECX);
+        addEntry(snap, 'EDX', IntReg^.EDX);
+        addEntry(snap, 'ESI', IntReg^.ESI);
+        addEntry(snap, 'EDI', IntReg^.EDI);
+        addEntry(snap, 'DS',  uint32(IntReg^.DS));
+        addEntry(snap, 'ES',  uint32(IntReg^.ES));
+        addEntry(snap, 'FS',  uint32(IntReg^.FS));
+        addEntry(snap, 'GS',  uint32(IntReg^.GS));
+    end;
+
+    { Error code }
+    if IntErr <> nil then
+        addEntry(snap, 'ERROR', IntErr^.Error);
+
+    { Special registers (EIP, CS, EFLAGS) }
+    if IntSpec <> nil then begin
+        addEntry(snap, 'EIP',    IntSpec^.EIP);
+        addEntry(snap, 'CS',     IntSpec^.CS);
+        addEntry(snap, 'EFLAGS', IntSpec^.EFLAGS);
+    end;
+
+    core.panic.panic(fault, info, @snap);
+end;
+
+procedure init;
+begin
+    { Register x86 halt as the panic halt procedure }
+    core.panic.registerHaltProc(@arch.x86.util.halt_and_catch_fire);
+
+    { Initialize the BSOD LVGL screen }
+    core.panic.init;
+end;
+
+end.

src/arch/x86/arch.x86.util.pas

@@ -28,8 +28,7 @@ unit arch.x86.util;
 interface
 
 uses
-    arch.x86.bda,
+    arch.x86.bda;
-    debug.tracer;
 
 function  INTE : boolean;
 procedure CLI();
@@ -48,7 +47,6 @@ procedure __SSE_128_memcpy(source : uint32; dest : uint32);
 
 procedure halt_and_catch_fire();
 procedure halt_and_dont_catch_fire();
-procedure BSOD(fault : pchar; info : pchar);
 procedure psleep(t : uint16);
 procedure sleep(seconds : uint32);
 
@@ -78,8 +76,7 @@ uses
     arch.x86.cpu,
     arch.x86.isr.types,
     driver.timer.rtc,
-    driver.io.serial,
+    driver.io.serial;
-    io.syslog;
 
 function MsSinceSystemBoot : uint64;
 begin
@@ -415,65 +412,6 @@ begin
     RorDWord:= result;
 end;
 
-procedure BSOD(fault : pchar; info : pchar);
-var
-    trace : pchar;
-    i     : uint32;
-    z     : uint32;
-
-begin
-    if not BSOD_ENABLE then exit;
-    io.syslog.writestringln('=== KERNEL PANIC ===');
-    io.syslog.writestringln('ASURO DID A WHOOPSIE!  :(');
-    io.syslog.writestringln(' ');
-    io.syslog.writestringln('Asuro encountered an error and your computer is now a teapot.');
-    io.syslog.writestringln('Your data is almost certainly safe.');
-    io.syslog.writestringln(' ');
-    io.syslog.writestringln('Details of the fault (for those boring enough to read) are as follows: ');
-    io.syslog.writestringln(' ');
-    io.syslog.writestring('Fault ID:   ');
-    io.syslog.writestringln(fault);
-    io.syslog.writestring('Fault Info: ');
-    io.syslog.writestringln(info);
-    io.syslog.writestringln(' ');
-    if IntReg <> nil then begin
-        io.syslog.writestringln('Processor Info: ');
-        io.syslog.writestring('   EBP: '); io.syslog.writehex(IntReg^.EBP);  io.syslog.writestring('  EAX: '); io.syslog.writehex(IntReg^.EAX);  io.syslog.writestring('  EBX: '); io.syslog.writehexln(IntReg^.EBX);
-        io.syslog.writestring('   ECX: '); io.syslog.writehex(IntReg^.ECX);  io.syslog.writestring('  EDX: '); io.syslog.writehex(IntReg^.EDX);  io.syslog.writestring('  ESI: '); io.syslog.writehexln(IntReg^.ESI);
-        io.syslog.writestring('   EDI: '); io.syslog.writehex(IntReg^.EDI);  io.syslog.writestring('   DS: '); io.syslog.writehex(IntReg^.DS);   io.syslog.writestring('   ES: '); io.syslog.writehexln(IntReg^.ES);
-        io.syslog.writestring('    FS: '); io.syslog.writehex(IntReg^.FS);   io.syslog.writestring('   GS: '); io.syslog.writehex(IntReg^.GS);   io.syslog.writestring('  ERROR: '); io.syslog.writehexln(IntErr^.Error);
-        io.syslog.writestring('   EIP: '); io.syslog.writehex(IntSpec^.EIP); io.syslog.writestring('   CS: '); io.syslog.writehex(IntSpec^.CS);  io.syslog.writestring('  EFLAGS: '); io.syslog.writehexln(IntSpec^.EFLAGS);
-        io.syslog.writestringln(' ');
-    end;
-    debug.tracer.freeze;
-    io.syslog.writestring('Call Stack:     ');
-    trace:= debug.tracer.get_last_trace;
-    if trace <> nil then begin
-        io.syslog.writestring('[-0] ');
-        io.syslog.writestringln(trace);
-        for i:=1 to debug.tracer.get_trace_count-1 do begin
-            trace:= debug.tracer.get_trace_N(i);
-            if trace <> nil then begin
-                io.syslog.writestring('                [');
-                io.syslog.writestring('-');
-                io.syslog.writeint(i);
-                io.syslog.writestring('] ');
-                io.syslog.writestringln(trace);
-            end else begin
-                io.syslog.writestring('                [');
-                io.syslog.writestring('-');
-                io.syslog.writeint(i);
-                io.syslog.writestring('] ');
-                io.syslog.writestringln('?????????');
-            end;
-        end;
-    end else begin
-        io.syslog.writestringln('Unknown.');
-    end;
-    io.syslog.writestringln('=== END KERNEL PANIC ===');
-    halt_and_catch_fire();
-end;
-
 procedure resetSystem();
 var
     good : uint8;

src/arch/x86/arch.x86.v86.pas

@@ -20,7 +20,7 @@ unit arch.x86.v86;
 interface
 
 uses
-    core.util, arch.x86.util, io.syslog, debug.tracer, arch.x86.memory.virtual, arch.x86.gdt, arch.x86.idt, arch.x86.isr.types;
+    core.util, arch.x86.util, core.panic, io.syslog, debug.tracer, arch.x86.memory.virtual, arch.x86.gdt, arch.x86.idt, arch.x86.isr.types;
 
 const
     { V86 EFLAGS: VM=1 ($20000), IOPL=3 ($3000), IF=0 }
@@ -540,8 +540,7 @@ end;
 
 procedure v86_chain_gpf; cdecl;
 begin
-    BSOD('arch.x86.fault.gpf', 'General Protection Fault.');
+    core.panic.panic('arch.x86.fault.gpf', 'General Protection Fault.', nil);
-    halt_and_catch_fire;
 end;
 
 procedure v86_gpf_isr; assembler; nostackframe;

src/arch/x86/fault/arch.x86.fault.ace.pas

@@ -22,8 +22,8 @@ unit arch.x86.fault.ace;
 interface
 
 uses
-    core.util, arch.x86.util,
+    arch.x86.util,
-    io.syslog,
+    arch.x86.panic,
     arch.x86.isr.types,
     arch.x86.isr.mgr,
     arch.x86.idt;
@@ -33,15 +33,10 @@ procedure register();
 implementation
 
 procedure Main();
-var
-    i : integer;
-    
 begin
     CLI;
     correctInterruptRegisters(true);
-    BSOD('AC', 'Alignment Check Exception.');
+    x86_panic('arch.x86.fault.ace', 'Alignment Check Exception.');
-    io.syslog.writestringln('Alignment Check Exception.');
-    arch.x86.util.halt_and_catch_fire;
 end;
 
 procedure register();

src/arch/x86/fault/arch.x86.fault.bpe.pas

@@ -22,8 +22,8 @@ unit arch.x86.fault.bpe;
 interface
 
 uses
-    core.util, arch.x86.util,
+    arch.x86.util,
-    io.syslog,
+    arch.x86.panic,
     arch.x86.isr.types,
     arch.x86.isr.mgr,
     arch.x86.idt;
@@ -33,15 +33,10 @@ procedure register();
 implementation
 
 procedure Main();
-var
-    i : integer;
-    
 begin
     CLI;
     correctInterruptRegisters(false);
-    BSOD('BE', 'Breakpoint Exception.');
+    x86_panic('arch.x86.fault.bpe', 'Breakpoint Exception.');
-    io.syslog.writestringln('Breakpoint Exception');
-    arch.x86.util.halt_and_catch_fire;
 end;
 
 procedure register();

src/arch/x86/fault/arch.x86.fault.btsse.pas

@@ -22,8 +22,8 @@ unit arch.x86.fault.btsse;
 interface
 
 uses
-    core.util, arch.x86.util,
+    arch.x86.util,
-    io.syslog,
+    arch.x86.panic,
     arch.x86.isr.types,
     arch.x86.isr.mgr,
     arch.x86.idt;
@@ -33,15 +33,10 @@ procedure register();
 implementation
 
 procedure Main();
-var
-    i : integer;
-    
 begin
     CLI;
     correctInterruptRegisters(true);
-    BSOD('TSS', 'Bad TSS Exception.');
+    x86_panic('arch.x86.fault.btsse', 'Bad TSS Exception.');
-    io.syslog.writestringln('Bad TSS Exception.');
-    arch.x86.util.halt_and_catch_fire;
 end;
 
 procedure register();

src/arch/x86/fault/arch.x86.fault.cfe.pas

@@ -22,8 +22,8 @@ unit arch.x86.fault.cfe;
 interface
 
 uses
-    core.util, arch.x86.util,
+    arch.x86.util,
-    io.syslog,
+    arch.x86.panic,
     arch.x86.isr.types,
     arch.x86.isr.mgr,
     arch.x86.idt;
@@ -33,15 +33,10 @@ procedure register();
 implementation
 
 procedure Main();
-var
-    i : integer;
-    
 begin
     CLI;
     correctInterruptRegisters(false);
-    BSOD('CF', 'Coprocessor Fault Exception.');
+    x86_panic('arch.x86.fault.cfe', 'Coprocessor Fault Exception.');
-    io.syslog.writestringln('Coprocessor Fault Exception.');
-    arch.x86.util.halt_and_catch_fire;
 end;
 
 procedure register();

src/arch/x86/fault/arch.x86.fault.csoe.pas

@@ -22,8 +22,8 @@ unit arch.x86.fault.csoe;
 interface
 
 uses
-    core.util, arch.x86.util,
+    arch.x86.util,
-    io.syslog,
+    arch.x86.panic,
     arch.x86.isr.types,
     arch.x86.isr.mgr,
     arch.x86.idt;
@@ -33,15 +33,10 @@ procedure register();
 implementation
 
 procedure Main();
-var
-    i : integer;
-    
 begin
     CLI;
     correctInterruptRegisters(false);
-    BSOD('CSO', 'Coprocessor Seg Overrun Exception.');
+    x86_panic('arch.x86.fault.csoe', 'Coprocessor Seg Overrun Exception.');
-    io.syslog.writestringln('Coprocessor Seg Overrun Exception.');
-    arch.x86.util.halt_and_catch_fire;
 end;
 
 procedure register();

src/arch/x86/fault/arch.x86.fault.dbge.pas

@@ -22,8 +22,8 @@ unit arch.x86.fault.dbge;
 interface
 
 uses
-    core.util, arch.x86.util,
+    arch.x86.util,
-    io.syslog,
+    arch.x86.panic,
     arch.x86.isr.types,
     arch.x86.isr.mgr,
     arch.x86.idt;
@@ -33,15 +33,10 @@ procedure register();
 implementation
 
 procedure Main();
-var
-    i : integer;
-    
 begin
     CLI;
     correctInterruptRegisters(false);
-    BSOD('DE', 'Debug Exception');
+    x86_panic('arch.x86.fault.dbge', 'Debug Exception.');
-    io.syslog.writestringln('Debug Exception.');
-    arch.x86.util.halt_and_catch_fire;
 end;
 
 procedure register();

src/arch/x86/fault/arch.x86.fault.dbz.pas

@@ -22,8 +22,8 @@ unit arch.x86.fault.dbz;
 interface
 
 uses
-    core.util, arch.x86.util,
+    arch.x86.util,
-    io.syslog,
+    arch.x86.panic,
     arch.x86.isr.types,
     arch.x86.isr.mgr,
     arch.x86.idt;
@@ -33,15 +33,10 @@ procedure register();
 implementation
 
 procedure Main();
-var
-    i : integer;
-
 begin
     CLI;
     correctInterruptRegisters(false);
-    BSOD('arch.x86.fault.dbz', 'Divide By Zero Exception.');
+    x86_panic('arch.x86.fault.dbz', 'Divide By Zero Exception.');
-    io.syslog.writestringln('Divide by Zero Exception.');
-    arch.x86.util.halt_and_catch_fire;
 end;
 
 procedure register();

src/arch/x86/fault/arch.x86.fault.dfe.pas

@@ -22,8 +22,8 @@ unit arch.x86.fault.dfe;
 interface
 
 uses
-    core.util, arch.x86.util,
+    arch.x86.util,
-    io.syslog,
+    arch.x86.panic,
     arch.x86.isr.types,
     arch.x86.isr.mgr,
     arch.x86.idt;
@@ -33,15 +33,10 @@ procedure register();
 implementation
 
 procedure Main();
-var
-    i : integer;
-    
 begin
     CLI;
     correctInterruptRegisters(true);
-    BSOD('DF', 'Double Fault.');
+    x86_panic('arch.x86.fault.dfe', 'Double Fault.');
-    io.syslog.writestringln('Double Fault.');
-    arch.x86.util.halt_and_catch_fire;
 end;
 
 procedure register();