Async IO, IOAPIC and improvements

# Conflicts:
#	src/include/lists.pas

.gitignore

@@ -10,5 +10,4 @@
 /*.sh~
 /*.img
 src/include/asuro.pas
-.vscode/launch.json
-.vscode
+localenv.json

.vscode/launch.json

@@ -3,18 +3,11 @@
         {
             "name":"Run",
             "request": "launch",
-            "type": "coreclr",
+            "type": "PowerShell",
             "preLaunchTask": "Build",
-            "program": "VBoxSDL",
-            "args": [
-                "--comment", 
-                "Asuro", 
-                "--startvm", 
-                "7d395c96-891c-4139-b77d-9b6b144b0b93"
-            ],
+            "script": "${workspaceFolder}/virtualbox-wrapper.ps1",
+            "args": ["-Command", "up"],
             "cwd": "${workspaceFolder}",
-            "console": "internalConsole",
-            "internalConsoleOptions": "neverOpen"
         }
     ]
 }

.vscode/tasks.json

@@ -9,14 +9,18 @@
             "command": "docker-compose",
             "args": [
                 "run",
-                "builder"
+                "builder",
             ],
             "type": "shell",
             "problemMatcher": [],
             "group": {
                 "kind": "build",
                 "isDefault": true
-            }
+            },
+            "dependsOn": [
+                "Close VirtualBox",
+                "Clean"
+            ]
         },
         {
             "label": "Build (Builder)",
@@ -26,6 +30,24 @@
                 "builder"
             ],
             "type": "shell"
+        },
+        {
+            "label": "Clean",
+            "command": "docker-compose",
+            "args": [
+                "down",
+                "--remove-orphans"
+            ],
+            "type": "shell"
+        },
+        {
+            "label": "Close VirtualBox",
+            "command": "./virtualbox-wrapper.ps1",
+            "args": [
+                "-Command", 
+                "down"
+            ],
+            "type": "shell"
         }
     ]
 }

compile_sources.sh

@@ -4,4 +4,4 @@ echo "======================="
 echo " "
 echo "Compiling FPC Sources..."
 echo " "
-fpc -Aelf -gw -n -va -O3 -Op3 -Si -Sc -Sg -Xd -CX -XXs -CfSSE -CfSSE2 -Rintel -Pi386 -Tlinux -FElib/ -Fusrc/* -Fusrc/driver/* -Fusrc/driver/net/* src/kernel.pas
+fpc -Aelf -gw -n -O3 -Op3 -Si -Sc -Sg -Xd -CX -XXs -CfSSE -CfSSE2 -Rintel -Pi386 -Tlinux -FElib/ -Fusrc/* -Fusrc/driver/storage/* -Fusrc/driver/storage/AHCI/* -Fusrc/driver/* -Fusrc/driver/net/* -Fusrc/prog/*  src/kernel.pas

doc/flatfs.md

@@ -0,0 +1,32 @@
+#Flat filesystem
+
+A super simple filesystem for asuro. Folders are emulated in filenames.
+
+Starts with disk info sector, sector 0 of volume
+
+---
+#### disk info
+
+jmp2boot        : ubit24;
+OEMName         : array[0..7] of char;
+version         : uint16 // numerical version of filesystem
+sectorCount      : uint16;
+fileCount       : uint16
+signature       : uint32 = 0x0B00B1E5
+
+
+the Rest of the sector is reserved
+
+---
+
+Starting from sector 1 is the file table. Table size is determined by entry size (64) * fileCount
+
+---
+####File entry
+
+name : array[0..59] of char //file name max 60 chars
+fileStart : 16bit // start sector of data
+fileSize : 16bit // data size in sectors
+
+---
+

docker-compose.yml

@@ -1,4 +1,3 @@
-version: "3.9"
 services:
   builder:
     build: .

iso/hello.txt

@@ -0,0 +1 @@
+Hello from the Asuro ISO!

readme.md

@@ -13,8 +13,8 @@ We welcome everyone to give building/breaking/fixing/shooting Asuro a go, feel f
     I don't think this needs an explaination.
 * [VSCode (Optional, but highly recommended)](https://code.visualstudio.com/)
     Visual Studio code is our IDE of choice, and we have a number of recommended plugins.
-    * [C# Plugin by Microsoft](https://marketplace.visualstudio.com/items?itemName=ms-dotnettools.csharp)
-        This plugin gives you the ability to use the 'coreclr' task type, allowing the automatic launching of virtualbox with the resulting image generated during compilation of Asuro.
+    * [PowerShell Plugin by Microsoft](https://marketplace.visualstudio.com/items?itemName=ms-vscode.powershell)
+        This plugin gives you the ability to use the 'PowerShell' task type, allowing the automatic launching of virtualbox with the resulting image generated during compilation of Asuro.
 * [VirtualBox](https://www.virtualbox.org/)
     Virtualbox is our Virtualisation environment of choice, don't ask why, it just is.
 
@@ -27,7 +27,7 @@ We welcome everyone to give building/breaking/fixing/shooting Asuro a go, feel f
 3. Install Docker for Windows.
 4. Install Git for Windows.
 5. Install VSCode & the listed plugins.
-6. Install VirtualBox.
+6. Install VirtualBox (v7+).
 7. Clone this repository.
 8. Run the following command in the root of the repo to build the docker image:
     ```powershell
@@ -50,32 +50,29 @@ We welcome everyone to give building/breaking/fixing/shooting Asuro a go, feel f
     ```xml
     <Machine uuid="{7d395c96-891c-4139-b77d-9b6b144b0b93}" name="Asuro" OSType="Linux" snapshotFolder="Snapshots" lastStateChange="2021-06-20T20:33:07Z">
     ```
-    Copy the uuid, in our case `7d395c96-891c-4139-b77d-9b6b144b0b93` and replace the uuid found in `.vscode\launch.json` under `args`, so that it looks something like this:
+    Copy the uuid, in our case `7d395c96-891c-4139-b77d-9b6b144b0b93` & create a `localenv.json` file in the project root with the following content:
     ```json
     {
-        "configurations": [
-            {
-                "name":"Run",
-                "request": "launch",
-                "type": "coreclr",
-                "preLaunchTask": "Build",
-                "program": "VBoxSDL",
-                "args": [
-                    "--comment", 
-                    "Asuro", 
-                    "--startvm", 
-                    "<YOUR UUID HERE>"
-                ],
-                "cwd": "${workspaceFolder}",
-                "console": "internalConsole",
-                "internalConsoleOptions": "neverOpen"
-            }
-        ]
+        "VirtualBox":{
+            "MachineName":"<YOUR_UUID_OR_MACHINE_NAME>"
+        }
     }
     ```
     This will allow VSCode to automatically launch VirtualBox once Asuro has been compiled.
+    
+    You can also enable the serial adapter "COM1" in mode "Raw File", give it a path, and provide this path in the `localenv.json` as follows:
+    ```json
+    {
+        "VirtualBox" : {
+            "MachineName": "<YOUR_UUID_OR_MACHINE_NAME>",
+            "LogLocation": "Fully\\Qualified\\Path\\To\\Your\\Log\\File"
+        }
+    }
+    ```
+    This will allow you to see the console output from Asuro in your host terminal.
 13. Open your project folder in VSCode, use CTRL+SHIFT+B to build & F5 to build + run in VBox.
 14. Congratulations! You can now play with Asuro!
 
-### Gotchas
+### Notes & Gotchas
+- The above process has been updated to be compatible with VirtualBox 7+, in which VBoxSDL was removed and vboxmanage should be used in its place. A small wrapper powershell script is used to achieve this.
 - It was noted that Windows builds above `20H2` seem to have issues installing WSL2. We may have to wait for a patch from Microsoft to fix this. Our devs are currently using build `20H2`.

src/driver/bus/PCI.pas

@@ -91,6 +91,7 @@ function getDeviceInfo(class_code : uint8; subclass_code : uint8; prog_if : uint
 procedure requestConfig(bus : uint8; slot : uint8; func : uint8; row : uint8);
 procedure writeConfig(bus: uint8; slot : uint8; func : uint8; row : uint8; val : uint32);
 procedure setBusMaster(bus : uint8; slot : uint8; func : uint8; master : boolean);
+procedure enableDevice(bus : uint8; slot : uint8; func : uint8);
 
 implementation 
 
@@ -442,4 +443,34 @@ begin
     pop_trace;
 end;
 
+//Enable device inturrupts and set bus master
+procedure enableDevice(bus : uint8; slot : uint8; func : uint8);
+var
+    addr : uint32;
+    cmd : uint32;
+begin
+    push_trace('PCI.enableDevice');
+
+    addr := ($1 shl 31);
+    addr := addr or (bus shl 16);
+    addr := addr or ((slot) shl 11);
+    addr := addr or ((func) shl 8);
+    addr := addr or ($04 and $FC);
+
+    outl(PCI_CONFIG_ADDRESS_PORT, addr);
+    cmd := inl(PCI_CONFIG_DATA_PORT);
+    cmd := cmd or PCI_COMMAND_MEM_SPACE;
+    cmd := cmd or PCI_COMMAND_BUS_MASTER;
+    cmd := cmd or (3 shl 1);
+
+    //enable interrupts, remove disable interrupt bit maybe
+    cmd := cmd and not PCI_COMMAND_INT_DISABLE;
+    // cmd := cmd and not (1 shl 9);
+
+    outl(PCI_CONFIG_ADDRESS_PORT, addr);
+    outl(PCI_CONFIG_DATA_PORT, cmd);
+
+    pop_trace;
+end;
+
 end.

src/driver/include/drivertypes.pas

@@ -21,6 +21,29 @@ unit drivertypes;
 
 interface
 
+const
+    PCI_CONFIG_ADDRESS_PORT = $0CF8;
+    PCI_CONFIG_DATA_PORT    = $0CFC;
+
+    PCI_COMMAND_IO_SPACE    = $0001;
+    PCI_COMMAND_MEM_SPACE   = $0002;
+    PCI_COMMAND_BUS_MASTER  = $0004;
+    PCI_COMMAND_SPECIAL_CYC = $0008;
+    PCI_COMMAND_MEM_WRITE   = $0010;
+    PCI_COMMAND_VGA_PALETTE = $0020;
+    PCI_COMMAND_PARITY      = $0040;
+    PCI_COMMAND_WAIT        = $0080;
+    PCI_COMMAND_SERR        = $0100;
+    PCI_COMMAND_FAST_BACK   = $0200;
+    PCI_COMMAND_INT_DISABLE = $0400;
+    PCI_COMMAND_SERR_ENABLE = $8000;
+
+    PCI_CAP_ID_MSI           = $05;
+
+    // Bits in the MSI Control register (16-bit):
+    MSI_CONTROL_ENABLE       = 1 shl 0;  // Bit 0
+    MSI_CONTROL_64BIT        = 1 shl 7;  // Bit 7
+    MSI_CONTROL_PVMASK       = 1 shl 8;  // Bit 8 (optional: per-vector masking)
 type
 
     PPCI_Device = ^TPCI_Device;
@@ -44,6 +67,7 @@ type
         address1       : uint32;
         address2       : uint32;
         address3       : uint32;
+
         address4       : uint32;
         address5       : uint32;
         CIS_pointer    : uint32;

src/driver/storage/AHCI/notes.md

@@ -0,0 +1,58 @@
+# AHCI Driver Notes
+
+## Pre-scheduling / Process Kill Hazards
+
+### 1. Dangling DMA Buffer (critical)
+When a process is killed, its `kalloc`'d buffers get freed. But the AHCI hardware
+is still DMA'ing into that physical memory. The DMA write lands on whatever now
+occupies that memory, silently corrupting the kernel heap or another process.
+
+**Fix:** Before freeing a process's memory, either:
+- Wait for all its pending AHCI slots to drain (`cmd_issue` bits clear), or
+- Issue a port reset to abort in-flight commands, *then* free memory.
+
+### 2. Dangling Completion Callback / Userdata Pointer (critical)
+In `storage_read`/`storage_write`, the completion callback writes to `@done` —
+a **stack-local variable**. If the scheduler preempts or kills the process while
+it's in the `hlt` loop, that stack frame is gone. The ISR fires and writes to a
+dangling stack address, corrupting whatever now uses that stack page.
+
+**Fix:** The `done` flag and completion context must be heap-allocated (or in a
+kernel-owned structure that outlives the process). A per-request struct like:
+```pascal
+type TPendingIO = record
+    done     : uint32;
+    ownerPID : uint32;  { skip delivery if process is dead }
+end;
+```
+
+### 3. Command Slot Leak
+If a process is killed with pending I/O, `pending[slot].inUse` stays `true`
+forever. Eventually all 32 slots fill up and the device becomes unusable.
+
+**Fix:** When killing a process, scan all AHCI devices for `pending[]` entries
+belonging to that process, and either:
+- Let the hardware finish but null out the completion callback (ISR just frees slot), or
+- Abort the command (port reset) and clear the slot.
+
+### 4. Interrupt-Disabled Preemption
+The `asm sti` before the `hlt` loop is fine, but if the timer fires during setup
+(between `readCallbackAsync(...)` and `asm sti`), the process could be switched
+out with interrupts in an unexpected state. `hlt` is also not preemption-safe.
+
+**Fix:** Move to a proper wait-queue/sleep mechanism instead of `hlt`.
+
+## Recommended Path Forward
+Implement a small **I/O request queue** owned by the kernel (not the process stack):
+1. Allocate a request struct
+2. Put it on a per-device queue
+3. ISR completes it
+4. Process kill walks the queue and cancels entries for that PID
+
+## Other Bugs Fixed (2026-03-03)
+- **vtop mask bug:** `$FFFFFF` (24-bit) → `$3FFFFF` (22-bit) for 4MB page offset
+- **find_cmd_slot:** Now checks `pending[].inUse` in addition to `cmd_issue` bit
+- **Missing lba5:** Both `send_read_dma_async` and `send_write_dma_async` now write all 48 LBA bits
+- **IOAPIC routing:** PCI interrupts routed through IOAPIC so AHCI interrupts actually reach the CPU
+- **LAPIC EOI:** `ISR_N` now sends LAPIC EOI for IOAPIC-delivered interrupts
+- **PxIS pre-clear removed:** No longer blanket-clears port interrupt status before issuing commands (was eating other slots' completions)

src/driver/storage/ATA_ISR.pas

@@ -1,85 +0,0 @@
-//  Copyright 2021 Aaron Hance
-//
-//  Licensed under the Apache License, Version 2.0 (the "License");
-//  you may not use this file except in compliance with the License.
-//  You may obtain a copy of the License at
-//
-//  http://www.apache.org/licenses/LICENSE-2.0
-//
-//  Unless required by applicable law or agreed to in writing, software
-//  distributed under the License is distributed on an "AS IS" BASIS,
-//  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-//  See the License for the specific language governing permissions and
-//  limitations under the License.
-
-{ 
-	Drivers->Storage->ATA_ISR - Primary ATA IRQ.
-	
-	@author(Aaron Hance <[email protected]>)
-}
-unit ATA_ISR;
-
-interface
-
-uses
-    util,
-    console,
-    isr_types,
-    isrmanager,
-    IDT;
-
-procedure register();
-procedure hook(hook_method : uint32);
-procedure unhook(hook_method : uint32);
-
-implementation
-
-var
-    Hooks : Array[1..MAX_HOOKS] of pp_hook_method;
-
-procedure Main(); interrupt;
-var
-    i : integer;
-    
-begin
-    CLI;
-    for i:=0 to MAX_HOOKS-1 do begin
-        if uint32(Hooks[i]) <> 0 then Hooks[i](void($00000000));
-    end;
-    console.writestringln('Disk Operation Complete');
-end;
-
-procedure register();
-begin
-    memset(uint32(@Hooks[0]), 0, sizeof(pp_hook_method)*MAX_HOOKS);
-    //isrmanager.registerISR(76, @Main);
-    //IDT.set_gate(76, uint32(@Main), $08, ISR_RING_0);
-end;
-
-procedure hook(hook_method : uint32);
-var
-    i : uint32;
-
-begin
-    for i:=0 to MAX_HOOKS-1 do begin
-        if uint32(Hooks[i]) = hook_method then exit;
-    end;
-    for i:=0 to MAX_HOOKS-1 do begin
-        if uint32(Hooks[i]) = 0 then begin
-            Hooks[i]:= pp_hook_method(hook_method);
-            exit;
-        end;
-    end;
-end;
-
-procedure unhook(hook_method : uint32);
-var
-    i : uint32;
-begin
-    for i:=0 to MAX_HOOKS-1 do begin
-        If uint32(Hooks[i]) = hook_method then Hooks[i]:= nil;
-        exit;
-    end;
-end;
-
-end.

src/driver/storage/Filesystems/asfs.pas

@@ -23,14 +23,16 @@ interface
 
 uses
     console,
-    storagemanagement,
-    util, terminal,
-    lmemorymanager,
-    strings,
     lists,
-    tracer,
+    lmemorymanager,
+    rtc,
     serial,
-    rtc;
+    storagemanagement,
+    storagemanager,
+    strings,
+    terminal,
+    tracer,
+    util;
 
 type
 
@@ -99,7 +101,7 @@ begin
     filesystemRecord^.endOfData       := filesystemRecord.sectorsPerTable; 
     //filesystemRecord.volumeLabel     := config^
 
-    disk^.writecallback(disk, start, 1, buffer);
+    storagemanager.storage_write(disk, start, 1, buffer);
     memset(uint32(buffer), 0, disk^.sectorSize);
 
     fileEntry            := PFileEntry(buffer)[0];
@@ -112,7 +114,7 @@ begin
     fileEntry^.attributes := 0;
     fileEntry^.location   := 1;
 
-    disk^.writecallback(disk, start + 1, 1, buffer);
+    storagemanager.storage_write(disk, start + 1, 1, buffer);
 
 
 end;

src/driver/storage/Filesystems/filesystemmanager.pas

@@ -0,0 +1,120 @@
+{
+    Driver->Storage->FilesystemManager - Filesystem driver registry and routing.
+
+    Filesystem drivers (FAT32, FlatFS, etc.) register themselves here.
+    When VolumeManager discovers a volume, FilesystemManager probes it
+    against all registered filesystem drivers to detect the filesystem type.
+
+    @author(Aaron Hance <[email protected]>)
+}
+unit filesystemmanager;
+
+interface
+
+uses
+    lists,
+    lmemorymanager,
+    storagetypes,
+    strings,
+    tracer,
+    util;
+
+var
+    filesystems : PLinkedListBase;
+
+procedure init();
+procedure register_filesystem(filesystem : PFilesystem);
+function get_filesystem_count() : uint32;
+function get_filesystem(index : uint32) : PFilesystem;
+function find_filesystem_by_name(name : pchar) : PFilesystem;
+function find_filesystem_by_id(system_id : uint8) : PFilesystem;
+procedure probe_volume(volume : PStorage_Volume);
+
+implementation
+
+procedure init();
+begin
+    push_trace('FilesystemManager.init');
+    filesystems := LL_New(sizeof(TFilesystem));
+end;
+
+procedure register_filesystem(filesystem : PFilesystem);
+var
+    elm : void;
+begin
+    push_trace('FilesystemManager.register_filesystem');
+
+    elm := LL_Add(filesystems);
+    memcpy(uint32(filesystem), uint32(elm), sizeof(TFilesystem));
+end;
+
+function get_filesystem_count() : uint32;
+begin
+    get_filesystem_count := LL_Size(filesystems);
+end;
+
+function get_filesystem(index : uint32) : PFilesystem;
+begin
+    if index < LL_Size(filesystems) then
+        get_filesystem := PFilesystem(LL_Get(filesystems, index))
+    else
+        get_filesystem := nil;
+end;
+
+function find_filesystem_by_name(name : pchar) : PFilesystem;
+var
+    i  : uint32;
+    fs : PFilesystem;
+begin
+    push_trace('FilesystemManager.find_filesystem_by_name');
+    find_filesystem_by_name := nil;
+
+    for i := 0 to LL_Size(filesystems) - 1 do begin
+        fs := PFilesystem(LL_Get(filesystems, i));
+        if stringEquals(fs^.sName, name) then begin
+            find_filesystem_by_name := fs;
+            exit;
+        end;
+    end;
+end;
+
+function find_filesystem_by_id(system_id : uint8) : PFilesystem;
+var
+    i  : uint32;
+    fs : PFilesystem;
+begin
+    push_trace('FilesystemManager.find_filesystem_by_id');
+    find_filesystem_by_id := nil;
+
+    for i := 0 to LL_Size(filesystems) - 1 do begin
+        fs := PFilesystem(LL_Get(filesystems, i));
+        if fs^.system_id = system_id then begin
+            find_filesystem_by_id := fs;
+            exit;
+        end;
+    end;
+end;
+
+procedure probe_volume(volume : PStorage_Volume);
+var
+    i  : uint32;
+    fs : PFilesystem;
+begin
+    push_trace('FilesystemManager.probe_volume.enter');
+
+    { Try each registered filesystem's identify callback against this volume }
+    for i := 0 to LL_Size(filesystems) - 1 do begin
+        fs := PFilesystem(LL_Get(filesystems, i));
+        if fs^.identifyCallback <> nil then begin
+            push_trace('FilesystemManager.probe_volume.tryFS');
+            if fs^.identifyCallback(volume) then begin
+                volume^.filesystem := fs;
+                push_trace('FilesystemManager.probe_volume.found');
+                exit;
+            end;
+        end;
+    end;
+    push_trace('FilesystemManager.probe_volume.exit');
+end;
+
+end.